Materials in Environmental Engineering : Proceedings of the 4th Annual International Conference on Materials Science and Environmental Engineering.

Intro -- Keynote Speech I. Strategies for Improving Hydropower Development -- Keynote Speech II. Biotemplated Mesoporous Materials for Wastewater Treatments -- Keynote Speech III. Design of Hard and Superhard Nanocomposites for Harsh Environment -- Keynote Speech IV. Numerical Simulation of Slag Corrosion Behavior of Lightweight Refractories for Refining Ladles -- Keynote Speech V. Precision Plastic Forming of Large Complex Component of Ti-Alloy -- Study about the Landslide Deformation Forecast Model Based on Kalman Filter Method and Taylor Seris and Material Properties -- Effects of Machining Process and Heat Treatment on the Mechanical Properties and Microstructure of TB2 Titanium Alloy Strip -- Study on Compound Characteristics of Oleic Acid, Glycerol and Organic Ester in Grinding Fluid -- Novel Room-Temperature Molten Salt Based on Chlorine Chloride with Hydrogen Bond Donors -- Study on Organic Modification of Aluminum Powder Coating -- Study on Material of Exothermic Insulation Riser Sleeve -- The Efficiency Calculation of Cobalt Oxide for Artificial Photosynthesis with Exponential- Doping -- Microscale Hierarchical Three-Dimensional Flowerlike CuO: Synthesis, Characterization, and its Supernormal Photocatalytic Activity under Visible Light Irradiation -- The Distribution Behavior of Phosphorus at Non-Equilibrium Condition Simulating the Casting Ladle -- Effects of Zr Addition on the Microstructure and Mechanical Properties of AlCoCrFeNiZr&lt -- sub&gt -- x&lt -- /sub&gt -- High-Entropy Alloys -- Research and Preparation of Super Hydrophobic and Self-Cleaning PVDF Membrane -- Preparation and Characterization of TiB&lt -- sub&gt -- 2&lt -- /sub&gt -- Coatings with Ultra-Low Residual Stress -- Crystal Structure and Microwave Dielectric Properties of Ca [(Li&lt -- sub&gt -- 1/3&lt -- /sub&gt -- Nb&lt -- sub&gt -- 2/3&lt -- /sub&gt -- )&lt.

sub&gt -- 0.9&lt -- /sub&gt -- Zr&lt -- sub&gt -- 0.1&lt -- /sub&gt -- ]O&lt -- sub&gt -- 3-δ&lt -- /sub&gt -- −xTiO&lt -- sub&gt -- 2&lt -- /sub&gt -- ceramics -- Mechanism of Mechanochemical Reactions in Magnesium-Aluminium Layered Double Hydroxides Systems -- Deposition of Diamond Films on Complex Cutting Tools by Hot-Filament Chemical Vapor Deposition -- The Crystal Unit Model of CsI(Tl) Film with Hexagon Microcolumns and Its Conversion Factor to X-Ray -- Effect of Ion Etching on the Surface Morphology, Structure and Adhesive Strength of the TiN Coating -- Influences of Photocatalytic Activity by TiO&lt -- sub&gt -- 2&lt -- /sub&gt -- Doping with Graphene Oxide and Lanthanum on the Carrier of Cenosphere -- Synthesis and Luminescence Properties of Eu&lt -- sup&gt -- 3+&lt -- /sup&gt -- -Doped NaTb(MoO&lt -- sub&gt -- 4&lt -- /sub&gt -- )&lt -- sub&gt -- 2&lt -- /sub&gt -- Hierarchical Microcrystals -- Pt&lt -- sub&gt -- x&lt -- /sub&gt -- Ni/meso-Al&lt -- sub&gt -- 2&lt -- /sub&gt -- O&lt -- sub&gt -- 3&lt -- /sub&gt -- (x = 0.60-2.07): High- Performance Catalysts for the Hydrogenation of N-Butanal at Low Temperatures -- Hysteretic Behavior of CFT Columns with Semi- Rigid Base Connection under Different Loading Modes -- Behavior of Liquid Phase Generation of High Phosphorus Oolitic Hematite during Sinter -- Influence of the UUV Body on the Performance of the Propeller -- Piezoresistivity of Polyethylene Terephthalate Nickel Powder Composite -- Preparation of Ti-Cu Alloying Surface Layer on Ti6Al4V Substrate via Friction Stir Processing for Flame-Retardant Performance -- Failure Analysis of Escalator Step Induced by the Bolt Surface Defects -- Surface Wear Mechanism of Escalator Step Chain: A Failure Analysis -- Toxicity Reduction Mechanism of ZnO NPs during Sludge Vermicomposting Process -- A Nanocomposite Film of Polyoxometalate and TiO&lt.

sub&gt -- 2&lt -- /sub&gt -- : Preparation, Characterization and Photochromic Property -- Application of Inductively Couled Plasma- Mass Spectrometry to the Speciation Analysis of Rare Earth Elements in Ion-Adsorption Rare Earth Ore -- Electronic Structure of Cu&lt -- sub&gt -- 2&lt -- /sub&gt -- ZnSn&lt -- sub&gt -- 1-x&lt -- /sub&gt -- Ge&lt -- sub&gt -- x&lt -- /sub&gt -- S&lt -- sub&gt -- 4&lt -- /sub&gt -- New Energy Materials Probed by Soft X-Ray Absorption Spectroscopy -- Preparation and Performance of a Chitosan/TiO&lt -- sub&gt -- 2&lt -- /sub&gt -- Composite Film by Lyer-by- Layer Method -- Facile Route to Synthetize Lanthanum Doped Titanium Dioxide Films for Improved Photocatalytic Performance -- Contact Property of Au on p-InP -- Effect of Polyethylene Oxide Concentration on Separation Performance of PVDF Hollow Fiber Plasma Separation Membrane -- Influence of Phosphate Concentration and PH Crystallization of Magnesium Ammonium Phosphate (MAP) -- Microstructure and Corrosion Resistance of CrMoVNbFex High-entropy Alloys -- Finite Element Analysis of Composite Shear Walls with Double Steel Plates and Filled Concrete for a Nuclear Island Structure under In-Plane Loading -- Exothermal Combustion Synthesis of the Composites TiB&lt -- sub&gt -- 2&lt -- /sub&gt -- /Ni from Ni-Ti-B System -- Research on Wetting Characteristics of Normal Acid, Alcohol and Alkane on Surface of Monocrystal Silicon -- Effect of Modified Argon Oxygen Decarburization (AOD) Stainless Steel Slag on Cementitious Properties -- Optimization of structure Design of Physical Vapour Transport Furnace for Silicon Carbide (SiC) Crystal Growth via Numerical Simulation -- Thermodynamical Analysis of the Spontaneous Combustion of FeS -- Cause and Prediction Model of Low Infrared Emissivity for Resin/Flaky Metal Composite Coatings.

Synthesis and Characterization of Modified Carbon Aerogels -- A Review on the Application of Photocatalytic Materials -- The Preparation of Nano ZnO/PVC and the Photocatalytic Degration of Waste Water from Seafood Processing -- Efficient Adsorptive Removal of Arsenic from Water by Titanium-Based Metal-Organic Frameworks (MIL-125) -- The Research of SVG in Three-Phase Four-Wire Power System -- The Application of CDMA Technology in the Measurement of Antenna Array -- Synthesis and Bactericidal Properties of MgO/TiO&lt -- sub&gt -- 2&lt -- /sub&gt -- Nano-Composites -- Effects of Assisting Agents Concentrations on Energy Consumption during the Electrokinetic Treatment of Contaminated Kaolin -- Development of a Solid State pH Sensor Based on Electrodeposited Iridium Oxide Films for Water Quality Detection -- Simple Fabrication of ZnO Hierarchical Structures with Enhanced Photocatalytic Activity -- Enhanced Cycling Stability of Multi-Cations Doped Spinel Lithium Manganese Oxide for Rechargeable Lithium Batteries -- Review on the Applications of Phase Change Materials (PCMs) for Building Envelopes -- Damage Analysis of Cast Iron Specimen with Different Crack Forms -- Study on the Performance of a High-Pressure Water Jet Dust Collector in a Powder Feeding Port of Explosive Sites -- Self-Assembled Grapheme / Carbon Nanotube Fibers as Electrodes for Super Capacitors -- Fatigue Life Prediction of a Kind of Frequentlyused Bolt under Random Excitations -- Research on Development of Armor Protection Materials and Technology -- Cold forming Cracking Reason and Solution Method of SS400 Hot Rolled Steel -- Effect of Flow Rate of Cooling Water on the Interfacial Heat Transfer Coefficient between Modular Water-Cooled Mold and Casting -- Study on High-Absorption Chrome Tanning Technology Assisted by CO&lt -- sub&gt -- 2&lt -- /sub&gt.

Low Temperature Plasma Treatment -- Simulation of Q345 Steel Billet Solidification Microstructure in Continuous Casting Based on Matlab -- Preparation and Properties of Neopentyl Glycol/Epoxy Resin Composite Phase Change Material for Thermal Energy Storage -- Hysteric Property Analysis for Semi-Rigid Base Connection of Concrete-Filled Square Steel Tubular Columns -- An Adaptive Harmonic Current Detection for Improving the Power Quality in Power Grid -- Paper Fiber Paper-Based ZnO Piezoelectric Nanogenerator for Self-Powered Energy Scavenging -- Fabrication of Super-Hydrophobic Surface with Micro- Nano-Structure on Brass Substrate by Chemical Etching and Surface Modification -- Preparation Technology and Experimental of Hydro-Thermal Method on Surface Modification of Biomedical Titanium -- The Co-Pilot Position of Vehicle Noise Quality Prediction Based on SVM -- Application of Aramid Fiber in Printed Circuit Board -- Online Intelligent Sorting Method of Gold Ore based on LIBS Technology -- Rapid Decolorization and Mineralization of Congo Red Using Fe&lt -- sub&gt -- 78&lt -- /sub&gt -- Si&lt -- sub&gt -- 9&lt -- /sub&gt -- B&lt -- sub&gt -- 13&lt -- /sub&gt -- Amorphous Alloy by Photo Fenton-Like Process -- Preparation of Ce, N-Codoped Mesoporous Titania Photocatalyst with High Photocatalytic Activity under Visible Light -- Preparation of TiO&lt -- sub&gt -- 2&lt -- /sub&gt -- /AC Composite and Characterization of Its Photocatalytic Activities -- Electrocatalytic Oxidation Degradation of Reactive Red 2 -- Nanoscale Fe&lt -- sup&gt -- 0&lt -- /sup&gt -- Supported on Three- Dimensional Graphene for the Removal of Methyl Orange from Water -- Study on the Optimal Extraction of Coal Resources under the Constraint of Ecological Environment -- Research on the Stability Calculation and Treatments of the Liyu Landslide in Zhuzhou City, Center Hunan Province.

Procurement Cost Control of New Energy Vehicles Manufacturing Enterprise under Supply Chain Management.

Description based on publisher supplied metadata and other sources.

Electronic reproduction. Ann Arbor, Michigan : ProQuest Ebook Central, 2024. Available via World Wide Web. Access may be limited to ProQuest Ebook Central affiliated libraries.