Advanced Materials and Processes IV.

Intro -- Advanced Materials and Processes IV -- Preface, Conference Organization and Committee -- Table of Contents -- Chapter 1: Nano Materials Science and Technology -- Absorption Spectrum of Carbon Nanotubes -- Cu-Ni Alloy Nanoparticles Supported on Multiwalled Carbon Nanotubes Composites with Pre-Treated Multiwalled Carbon -- Effect of Electrospinning Process on Electrospun Chlorinated Polyvinyl Chloride (CPVC) Nanofibers -- Enhanced H2 Sensing of SnO2 Nanowires Functionalized with Pt and Pd Catalyst Nanoparticles -- Influence of Vacuum on Nano-Diamond Cathode Field Emission Characteristics -- Piezoelectric Effect of Quaic-Nanotetrapods ZnO Nanostructure -- Preparation and Characterization of the Amidoxime-Modified Polyacrylonitrile (PAN-Amidoxime) Nanofibre Composite -- Size Effects of Heat Conduction for Silicon Nanograins -- Viscosity of Al2O3 Nanoparticles Dispersed in Ethylene Glycol -- Mechanical Properties of the Honeycomb Nanoporous Membranes -- Bandgap Determination of Cubic Rocksalt AlN Film from Experimental and Theoretical Investigations -- Chapter 2: Metals, Alloys and Technology -- Comparative Analysis of Crack Growth Characteristics Based on Virtual Crack Closure Technique -- Effect of Iron Content on the Strength and Conductivity of Cu-Fe In Situ Composite -- Gas Sealing Performance Study of Metal W Shaped Seal Ring -- Mechanical Property Comparison Analysis of Two Kinds of Shape Memory Alloy Patella Claws Based on Finite Element Method -- Mechanics Analysis of Protective Casing and Splicing Sleeve -- Research on the Mechanical Properties and Corrosion Resistance of Mg-RE and Mg-Zn-Cu Alloys -- Study on Clinching of Titanium Alloy -- The Electrochemical Behaviors of HSn70-1A Brass in Polluted Freshwater -- The Red Electroluminescence of Iridium Complex at Different Concentrations and Host Materials.

Influence of Heat Treatment on Microstructure and Mechanical Properties of Die-Cast AZ91D Alloy with RE Elements -- Research of Anti-Extrusion Process for Cylinder of Spray-Formed Ultra-High Strength Aluminum Alloy -- Deformation Behavior of Mg-7Gd-5Y-1Nd-0.5Zr Alloy during Hot Compression -- Experiment on Direct Smelting and Alloying Process between High-Carbon Ferrochrome and Molybdenum Oxide -- Production of Fine-Grained and Weak Texture Structure in an Mg-7Gd-5Y-1Nd-0.5Zr Alloy by Multi-Axial Forging -- Research on Crack Region's Electrochemical Corrosion Performance in Hot-Dipping Galvanizing -- Study on Hydrogen Content of Solid Industrial Pure Aluminum -- Study on the Creep Properties and Microstructures of EW75 Alloy -- Study on Tribological Performance of Al2O3 Particle Reinforced the Al-Sn Bearing Alloy -- Research on Fatigue Notch Factor of Aluminum Corrosion Pits -- The Investigation of Dynamic Stress Equilibrium of Compact Tension Specimen Based on Hopkinson Tension Bar Device -- The Phase Change Study of Titanium Concentrate during Heat Treatment -- Chapter 3: Steel Materials and Applications -- Control Model of Steel Ladle Base on Overlap Time among the Different Casts -- Development of Enameling Steel Sheet Used for Heat-Exchanger -- Effects of Different Microalloying and Controlled Cooling Technology on Microstructure and Properties of 500MPa High-Strength Rebars -- Numerical Simulation and Cold Model Experiments on Ladle Furnace by Ultrasonic -- The Effect of Air Knife Flow Rate on Coating Weight and Thickness for a Hot Dipping Process Simulator -- The Residual Life Prediction of High Temperature Low Cycle Fatigue of 30CrMnSiA Steel -- Thermodynamic Model of Calculation of Sulfur Distribution Ratio between B2O3-Containing Slag and Molten Steel -- Microstructure Evolution of Environmental Graphitized Hypoeutectoid Free Cutting Steel.

Study of the Solid-State Joining Process for Endless Hot Rolling -- Thermal Analysis on Solidification Behaviors of Hypoeutectic Grey Iron in Lost Foam Casting -- Study on Oxidation Behavior of Stainless Steels in Short Time -- Comparison Study on the Corrosion Resistance of Stainless Steel and Copper Tubes in LiBr Solution in Heat Pump -- Chapter 4: Resin, Rubber and Polymer Materials -- Crystallisation and Dynamic Mechanical Relaxation Behavior of High Density Polyethylene/Isotactic Polypropylene Blending Monofilaments -- Effect of Processing Aids on the Performance of High Filled Polypropylene -- Mesoscale Simulations of the Polymer Blends Based on the Mesoscopic Dynamic Method -- Research on Static Mechanical Properties of Metal Rubber by Wire Mesh -- Research on Vibration Characteristic of Metal Rubber by Wire Mesh -- Synthesis, Characterization and Anticorrosion Performances Study of Different Acid Doping Polyaniline -- Modeling and Actuation Performance Analysis of Conically-Shaped Dielectric Electroactive Polymer Actuator -- Study on Preparation of Biodegradable Polyurethane Foam -- Research Progress of the Polyurethane-nTiO2 Self-Cleaning Coating -- Design of Discontinuous Fiber Reinforced Injection Molded Polymer Matrix Composite Parts -- Molecular Dynamic Simulations on the Compatibility of PP/PA12 Blends -- Chapter 5: Optical/Electrical/Magnetic Materials and Technology -- Numerical Studies to Signal Characteristics with the Metal Magnetic Memory-Effect Based of Cast Iron -- The Study on Growth Interface of Floating Zone Silicon Crystal -- Study of Annealing on Fluorescent Derivatives -- Hydrothermal Synthesis, Photoluminescence and Room Temperature Ferromagnetism of Co-Doped Rod-Like ZnO Particles -- Measurement and Evaluation of Ferrite Surface Crack.

Preparation and Electromagnetic Properties of Ferriferrous Oxide/Polyaniline Composites -- Synthesis and Luminescence Properties of Na3YSi2O7:Sm3+, Eu3+ Phosphor -- Synthesis and Properties of Naphthalimides Schiff Base Fluorescent Probe for Ag+ -- Synthesis and Photophysical Properties of Charged Iridium(III) Cyclometallates Based on Hole-Transporting Carbazole Unit -- Experimental Research of Damage Occurred on Large Cross-Section Conductor by Different Patterns of String Pulley -- First-Principles Calculations of Energy Band for Wurtzite ZnO under Uniaxial Loading along [0001] Direction -- Determination of 1,2-Benzisothiazolin-3-One in Paper for Food Packaging by Fluorescence Spectroscopy -- Fluorescence Study on the Direct Detection of Octylphenolin Plastic Food Packaging Materials -- Research Progress on Magnetorheological Fluid -- Hydrothermal Synthesis of SrSO4:Eu2+ Microcrystals with Different Morphologies and its Luminescence Properties -- Chapter 6: Ceramic Materials and Technologies -- A Study on the Green Design of Ceramic Products in the Era of Information -- Ceramic Product Design Based on 3D Printing Technology -- Effect of La2O3 Addition on the Microstructure and Mechanical Properties of TiC-Based Cermets -- Important Components Analysis of Ceramic Rapid Molding Machine -- Microstructure Analysis of Al2O3 Ceramic Coatings Composite Steel Plate Prepared by Self-Propagating High-Temperature Synthesis -- The Development Trend of Modern Ceramic Products on the Humanized Design -- A Ceramic Crack Test Method Based on the Maximum Variance Ratio of Inter-Class and Intra-Class -- Chapter 7: Composite Research and Applications -- Advances of Study on the Developments and Physical Properties of Composite Materials -- Experimental Research on Medium Leakage of CFRP Laminates after Impact.

Experimental Study of a Certain Type of Aircraft Structure Repair Adhesive -- Impacts of Temperature on Mechanical Properties of FGMs -- Influence of MgO Coating Layer on Properties of MgO-CaO Refractories -- Investigation of Impact and After-Impact Properties of Carbon Fiber/Epoxy Composites Modified with Multi-Wall Carbon Nanotubes -- Research in New Technologies and New Materials in the Sports Industry -- Natural Aging Test for CF3011/BA9916-II Composite in Marine Environment -- Thermal Behavior, Mechanical Property and Microstructure of Low-Density Polyethylene Filled by Diatomite -- Preparation of MFI Membrane on Mesoporous-Layer-Modified Macroporous Al2O3 Substrate by Secondary Growth Method and its Permeation Property -- Study on Microstructure Formation of TiAl Based Micro-Laminates Deposited by EB-PVD -- Mechanical Properties of Fumed Silica / HDPE Composites -- Constitutive Equation for Elevated Temperature Flow Behavior of Fe-Cr-Ni Preform Reinforced Al-Si-Cu-Ni-Mg Aluminum Composite -- Chapter 8: Fiber Materials and Textile Materials -- Analysis Based on Impact Resistance of Motorcycle Clothing Fabric Performance -- Double Face with Pattern Effect Design of Thermal Jacquard Based on Three-Layer Weave Structure -- Fuzzy Comprehensive Evaluation of the Wearability of Shapewear Fabric Made of PTT Filament -- Study on Properties of Ultrasonication Treated Pulp Fiber -- Study on Static and Dynamic Pattern Transformation Glowing Optic Fiber Scene-Like Jacquard Wall-Mounted Fabrics -- Study on Wearing Characteristics of Sorona/Cotton Blended Seamless Knitted Fabric -- The Research for the Properties of the Outlast/Viscose Blended Yarns -- Graft of Bis-QAC to Cotton Fiber and its Antibacterial Characteristics -- Characterization and Hydrolization of Acetate Fiber by Sodium Hydroxide.

Design and Development of Cool Multifunctional Composite High-Grade Fabrics.

Selected, peer reviewed papers from the 4th International Conference on Advanced Design and Manufacturing Engineering (ADME 2014), July 26-27, 2014, Hangzhou, China.

Description based on publisher supplied metadata and other sources.

Electronic reproduction. Ann Arbor, Michigan : ProQuest Ebook Central, 2024. Available via World Wide Web. Access may be limited to ProQuest Ebook Central affiliated libraries.