Polymer Composites and Polymer Testing.

Intro -- Polymer Composites and Polymer Testing -- Preface and Committee -- Table of Contents -- Chapter 1: Polymer Composites and Applied Materials -- A Magnetic Array Fabricated by a Novel Process Constructed with Photosensitive Polyimide-Ferrite Nanocomposite -- Effect of Liquid Structural Transition on the Morphology of Solid/Liquid Interface during the Unsteady-State Unidirectional Solidification -- Effect of Particle Size of Natural Graphite on Methyl Blue Sorption Behavior of Expanded Graphite -- Expansion Mechanism of Expandable Graphite Formed by Natural Graphite with Different Particle Size -- Finite Element Implementations to Predict the Failure of Composite Laminates Under Uniaxial Tension -- Improved Physical and Electrochemical Hydrogen Storage Kinetics of the Mg20Ni10-XMx (M=Cu, Co -- X=0, 4) Alloys by Melt Spinning -- Influence of Bi2O3 on the Structure and Magnetic Properties of Barium Ferrite Powders Materials -- Investigation about Synthesis of Carbon Nanotubes with Various Structures Governed by Temperature and Relevant Growth Mechanism -- Investigation of Structure and Properties of PET Multifilament Irradiated with UV in Different Atmosphere -- Microstructure and Mechanical Properties of Mg-6Al-0.3Mn-0.9Y Alloy -- Microstructure and Wear Resisting Property of 40Cr Steel Treated by Supersonic Particles Bombarding -- Perfluoropolyether Modified Waterborne Shape Memory Polyurethaneurea Ionomers for Potential Medical Implant Application -- Photodecomposition of Methylene Blue by the S, Al Doped TiO2 Mesoporous Materials -- Preparation Mechanism of Electrostatic Self-Assembled Polyelectrolyte Film Using Quartz Crystal Microbalance -- Self-Piercing Riveting Process Simulation of Joining Aluminium Alloy Sheets -- Size Effect of Expandable Graphite -- Size-Dependent Young's Modulus of the FCC Metallic Films.

Structure and Properties of Composite Films of Cellulose and Chitosan from Ionic Liquid -- Study of the Preparation and Degradable Characteristics of CaCO3-PE Film -- Surface Properties of UHMWPE Fiber after Low Temperature Argon-Plasma Treatment -- Synthesis and Characterization of Novel PCA-PEG-PCA Triblock Copolymer -- Synthesis and Characterization of Polyesters Containing 5-Fluorouracil in the Main Chain -- Synthesis of Poly(Urethane-Urea)s from Polycarbonate Macrodiols and IPDI with the Addition of Derivant of Propylene Carbonate -- The Effect of Fatty Acid on Phase Behaviors of Tween 80/bmimPF6/toluene Microemulsions -- The Electrochemical Performance of Carboxymethyl Cellulose with Different DS as a Binding Material in Lithium Batteries -- Chapter 2: Applied Mechanics and Manufacturing Technology -- Design of Rupture Strength Based on Confidence Level of HK40 Steel -- An Approach for Analysis of Bulged Profile and Thickness Distribution of Tube in Free Hydro-Bulging Process -- Numerical Investigation of Air Flow Distribution in a Swirling Fluidized Bed -- Approach of Selecting Profile Modifications Curves for Spur Gears -- Preparation and Properties of a Custom-Designed Nickel-Based Amorphous Brazing Foil -- Investigation on the Process Characteristics of Laser Cladding Fabrication Using 45 Carbon Steel Wire -- Pilot Study of Three-Stage Catalytic Ozonation - Biological Activated Carbon for Drinking Water Advanced Treatment -- Finite Element Analysis for Homogeneous Earth Dam of Heisonglin Reservoir -- The Abstract Device Models and the General Mathematical Models for Energy and Exergy Analyse in Papermaking Mill -- Effects of Ball Milling Time on the Microwave Properties of Mg4Nb2O9 Ceramics by the Solid-State Process -- Pilot Study of Coagulation-Direct Filtration for Low-Temperature and Low-Turbidity Source Water.

Study on the Phase Formation of Corundum-Type Mg4Nb2O9 Powders by the Solid-State Process -- Effects of Sintering Temperatures on Microwave Properties of Mg4Nb2O9 Ceramics by the Solid-State Process -- The Optimization Design of Certain FRP Sluice Gate -- Effects of Holding Time on Microwave Properties of Mg4Nb2O9 Ceramics by the Solid-State Process -- Advances in Process Technology of Sepiolite Mineral Fibrous Materials -- Quantitative Analysis of Residence Time Distribution in Kenics Static Mixer -- Motion Trajectory Analysis of Potting Knife in Pot-Making Mechanism Based on Pro/E -- The Finite Element Simulation of Milling Based on Orthogonal Cutting Model -- Theory Analysis of FBG Characteristics under 3D Homogeneous Stress Field -- Comparative Study of RANS and LES Simulation Methods for Analysis of Turbulence in a Tubular Stirred Reactor -- Fabrication of C/Cu Composites by Mechanical Activation and Spark Plasma Sintering -- Research on Oil Change Period of LNG and Diesel Engine Bus -- Main Parameters Calculation and Performance Test of 7YGS-45 Type Self-Propelled Dual-Track Orchard Transport -- Dynamics Analysis of Refrigeration Compressor Based on Finite Element and Experimental Modes -- A Numerical Analysis for Cracks Emanating from a Quarter-Spherical Cavity on the Edge of an Elastic Body -- Design of Double-Light Shadowless Lifting Retractor -- Investigation on Moiré in Multicolor Overprinting -- Theoretical Research of Residual Stress on H-Beam Roller Straightening -- Impact of Step Height on Deformation of Foundation for Wind Power Generator System -- Application Research on Fault Diagnosis Based on Improved Wavelet Neural Network -- Adaptive Synchronization for a Class of Switched Chaotic Systems with Uncertainty -- High Temperature Tribological Behavior of Ball Milled Expanded Graphite/Iron Powders.

Earthquake Response of Asymmetric Structure Considering Soil-Structure Interaction in Time Domain -- Simulation of Cavitation Erosion in Different Throttling Pipelines -- Research on Reproduction Characteristics of Digital Laser Plate -- Numerical Simulation of Steel Plate Processed by Shot-Peening -- General Rotation Union Design Experiment for Seed Dispensing Performance of Seed Metering Disc -- Rheological Behavior of Diamond Particle/Epoxy Resin Adhesive Adapted to Screen Printing -- Research of the Factor that Influence the Ink Printing Density of Water-Based Gravure Ink -- Study on the Deformation and Fracture of Bolted Roadway with Infrared Characteristics -- Three-Dimensional Finite Element Simulation Analysis of Jinliang Rive Inverted Siphon Structure -- Finite Element Method Mechanical Characteristics Analysis of Tower Foundation for Wind Turbine Generator System -- Application of Finite Element Method in Structure Analysis for Inclined Clay-Core Wall Earth Dam -- Dynamic Inverse Model for Multi-Sensor Measurement System Based on Wavelet Neural Network -- A New Numerical Analysis for Inclined Crack in an Infinite Plate -- Analysis and Evaluation on Detectability of Characteristic Index for Coal Property -- Influence of Processing Methods on Number and Form of Cracks of Bionic Units on Vermicular Cast Iron -- Research on Distribution for Soot Remain Different Height in Smoldering Fire -- Adaptive Switching Control for Projected Synchronization of Chaotic Systems with Uncertainties -- Application of Machine Vision Technology in the Detection of Industrial Products -- Test Methods for Suspended Load Abrasion and Bed Load Abrasion on Hydraulic Concrete -- Experimental Investigation on Water Miscible Rolling Lubricant J4 -- An Optimal Study of the Preparation Conditions of Urea-Modified Titanium Ore Adsorbent.

Wear Resistance Experimental Analysis of Closed Extruding Fine Blanking Parts Surface -- Force Performance Research for the Interior Joint of New Light-Weight Portal Rigid Frame -- Chapter 3: Other Related Topics -- Numerical Simulation of Three-Component Induction Resistivity Log -- Low Voltage Ride through (LVRT) Control of Double-Fed Wind-Driven Generator -- Use KMnO4 to Control Bromate Formation during Drinking Water Ozonation: Influencing Factors -- An Effective Thermal Flow Meter Based on TDC-GP1 Chip -- Near-Infrared Spectroscopic Measurement of Organic Matter in Soil -- Study on the Removal of Copper Ions from Water Using Eco-Friendly Attapulgite/Chitosan Composites -- The Linear Auto Disturbances Rejection Controller Application in Beam Magnetic Suspension System of Gantry Moving Type Numerical Control Machine Tool -- Robust H∞ Control with Actuator Faults -- Electrochemical Sensors for L-Tryptophan Based on Molecularly Imprinted Polymers -- The Synchronization Control of Gantry Machining Center Magnetic Suspension System Base on ModelReference Fuzzy Adaptive -- Design of Temperature Measured Terminal with GPRS in the Central Heating Room and Research of the Charging Method by Indoor Temperature Measured -- Development of Data Recording and Analysis System for Urban Rail Vehicle -- Estrogenicity of Six Typical Aqueous Pollutants -- Study of Remote Elevator Monitoring Fault Detection System -- Research of the Distance Calculation Algorithm Based on RSSI -- Fuzzy Control Tuning Method of Digital PID Parameters -- Research on Aluminum Electrolysis Equipment Control Strategy -- Study on Integral Summation Algorithm for Measurement of Superfine Scale Based on Fraunhofer Diffraction -- Gear Transmission Fault Tree Analysis Based on Bayesian Network -- Calculation of Magnetic Susceptibility and Conversion of Units.

Theory Analysis of Three-Component Induction Resistivity Log.

Selected, peer reviewed papers from the 2012 International Symposium on Polymer Composites and Polymer Testing (ISPCPT 2012), March 23-25, 2012, Hangzhou, Zhejiang, China.

Description based on publisher supplied metadata and other sources.

Electronic reproduction. Ann Arbor, Michigan : ProQuest Ebook Central, 2024. Available via World Wide Web. Access may be limited to ProQuest Ebook Central affiliated libraries.