Eco-Materials Processing and Design XIII.

Intro -- Eco-Materials Processing and Design XIII -- Preface and Organizing Committee -- Table of Contents -- A. Environment Related Materials and Photocatalysts -- Effect of Solution Treatment on Microstructure and Properties of the SAF2507 Super Duplex Stainless Steel -- Materials Life Cycle Assessment of Chemical Strengthening Glass Used for Touch Screen Panel -- MLCA (Material Life Cycle Assessment) for ITO Recycling -- Study of Resistance Characteristics of Silicon Carbide Resistor Materials -- Synthesis of Sn4+ Doped TiO2 Nanotube and its Photocatalytic Activity -- Removal of Isopropyl Alcohol (IPA) Using Anodized Photocatalytic Metal Membrane Reactor -- Treatment Performance of Low Strength Electric Wastewater Using Solid-Advanced Oxidation Processes -- Photocatalytic Degradation of Humic Acid Using Ti/Anodized TiO2 Metal Plate with Fe-Doping -- Fabrication of Nanosheet-Assembled Hierarchical AlOOH and γ-Al2O3 Microspheres and its Application in Water Purification -- Low Temperature Molten-Salt Synthesis and Characterization of Nanocrystalline Mullite Whiskers from Coal Gangue -- Effect of Temperature and Carbon Contents on the Synthesis of β-SiC from Silicon Sludge by Direct Carbonization Method -- A Study on the Synthesis of SiC Powder from the Silicon Sludge of the Photovoltaic Industry -- A Study on the Improvement of Nitrogen Removal Efficiency in Small Size Sewage Treatment Facility Utilizing Zeolite Carrier -- The Rheological Properties of Konjac Glucomannan (KGM) Solution -- Preparation and Application of Electrospinning Membranes of Thermoplastic Carboxymethyl Cellulose/PLA for Removal of Cu2+ from Aqueous Solutions -- Extraction of Polyethylene Residue Components in Soil -- Research of Low Cost Fracturing Proppant -- Studies on Adsorption of Strontium (II) by Expanded Rice Husk.

Preparation of Porous Poly(butylene succinate)(PBS)/Starch Blends for Absorption of Copper (II) Ions -- The Study of Environmental Degradation Dharacteristics of Photodegradable Polyethylene Film -- Effect of PE Film Degradation Products on the Carbon Dioxide Content of Soil: A Mathematical Study -- Effect of Gelatinization on Morphology and Thermal Properties of Polyvinyl Alcohol-Corn Starch Blend Films -- Factors Affecting Coagulation of Phosphorus from Municipal Sewage -- Adsorption of Bromic Acid Ion in Water by the Reduced Titanium Oxide -- B. Eco-Materials Processing and Design, Multifunctional Materials -- Properties of Artificial Lightweight Aggregate by Using Magnetic Separated Bottom Ash from Coal Power Plant -- Bio-Inspired Synthesis of Al2O3/Polymer Composite -- Thermoelectric Properties of Manganese Monosilicide Synthesized by Mechanical Alloying Process -- First-Principles Investigation on Ag, N Codoped in p-Type ZnO -- Characteristics of Artificial Lightweight Aggregate by Using Magnetic Separated Desulfurized Fly Ash and Dredged Soil -- Cu2O Doping Effects on Microstructure and Piezoelectric Properties in (Na0.52K0.44)(Nb0.9Sb0.06)O3-0.04LiTaO3 Pb-Free Ceramics -- Effect of N2 Addition on Microstructure and Properties of SAF 2507 Duplex Stainless Steels GTAW Welded Joint -- Study on the Manufacturing of Zirconia Cutting Square Tools by PIM and Hot Isostatic Pressing Process and Test Cutting -- Compressive Strength Evaluation of SCR Catalyst Recycled Al-Dross -- A Study on the Effect of High Calorie Diet on Stress Alleviation -- Fabrication and Surface Hardening Properties for SiC/AlN Ceramic Composites with Different SiC Grain Size -- Reduction Effects of Urban Heat Island by Water-Retentive Pavement -- Prediction of Fine Blanking Tool Deformation to Produce Multiple Turbocharger Vane Levers with Stainless Steel.

Defects Diagnosis Technology of Water Supply Pipe's Network Using Pipe Endoscope Camera of High Resolution/High Pressure Resistance Performance -- Preparation and Characterization of KGM/CaCO3 Composite Films -- Effect of Aluminum Addition on the Static Recrystallization Behavior of Magnesium -- A Study on Thermal Conductivity and Mechanical Properties of Al-Zn-Mg Aluminum Alloys -- A Study on Surface Oxidation Coating Characteristic of Al-Si Casting Alloys -- Hot Workability of a High Strength Low Alloy Steel for Construction Application -- Effect of Deep Cryogenic Treatment on Microstructure of 5A06 Aluminum Alloy MIG Welded Joint -- Microstructure and Mechanical Properties of Al/Cu Composite Produced by Hydrostatic Extrusion during Isothermal Aging -- Effect of Annealing Process on Mechanical Properties and Texture Changes of AZ31 Mg Alloy Sheets -- C. Nano-Structured and/or Hybrid Materials, Porous Materials -- Porosity Measurement of Porous Copper by Unidirectional Solidification -- Effects of β-Si3N4 Seeds Addition on Microstructure and Mechanical Properties of Porous Si3N4 Ceramics -- Synthesis of ZnO Nanorods with Tunable Aspect Ratio -- Effect of Size and Stress Field on Electronic Properties of ZnO Nanowires -- Hydrogen Permeability of NiO-Doped Alumina with Nickel Composites Membrane -- Preparation of Porous Alumina Powder Using Sol Containing Trehalose Dihydrate -- Research on Production of Bluecoke with Low Temperature Carbonization Process -- Synthesis and Characterization of Sn Doped SiO2 by Reverse Micelle and Sol-Gel Process -- Development of Dynamically-Formed Membranes Using Colloidal Silica and Kaolin -- Preparation of Lanthanum Oxide Nanoparticles by Chemical Precipitation Method -- Preparation and Characterization of Polyethylene/Ethylene Vinyl Acetate Composite Non-Dropping Greenhouse Film.

Study on Microstructure and Mechanical Properties of Porous Si3N4 Ceramics -- Characterization of Cold-Rolled Nickel Electroplated Copper Sheet -- Fabrication and Characterization of Alumina/Zirconia Ceramic Compound -- Research of Assembled Monolithic Compound Spiral Reinforced Concrete Column Encased by Steel Plate Hoop and Jointed by Bolts -- D. High Performance Materials -- Low-Temperature and Rapid Fabrication of Bulk Nano-TiO2 Ceramic -- Study on Preparation of Nano-SiC Fibers by Template Method Based on Waste Cotton Linter -- Shot Peening Characteristics of Cold-Rolled Mo Sheet -- Preparation and Mechanism of Nano-TiO2 Coatings on Poly(p-phenylene-benzobisoxazole) (PBO) Fiber -- Effect of TiC Content on the Microstructure and Mechanical Properties of Ti3AlC2/Al2O3 In Situ Composites Synthesized by Hot Pressing -- Effects of Sintering Conditions and Additives on Translucent Silicon Nitride Ceramics -- The Dynamic Recrystallization of Hot-Deformed Austenite in a Micro-Alloyed Steel -- Effect of Electromagnetic Stirring on the Microstructure and Mechanical Properties of the High Speed Steel -- Preparation and Performance of LiFePO4/C Using Fe2O3 as Starting Material -- Molten Salt Synthesis of Mullite Whiskers from Silicon Carbide Precursor -- Effect of Sintering Agents on the Sintering and Physical Properties of ATO (Antimony Doped Tin Oxide) -- A Brief Review about Surface Treatment of Magnesium Alloys -- Effects of Impregnating and Heat Treatment on the Oxidation and Thermal Shock Properties of Pressureless Sintered SiC/Graphite Composites -- Synthesis of Layered-Ternary Ti2AlC/Al2O3 Composites by an In Situ Reaction and Hot Pressing Sintering -- Microstructure Evolution during Combustion Synthesis of Ni/Ni-Aluminide Laminated Composites -- Effect of Sintering Temperature on the Microstructure and Electrical Properties of SnO2-Based Varistors.

Effect of Calcination of the Raw Materials on the Microstructure and Electrical Properties of ZnO-Based Linear Resistance Ceramics -- Drawing and Property of 316L Extra Fine Stainless Steel Wires -- Effect of Ti, Al and Cu Addition on Structural Evolution and Phase Constitution of FeCoNi System Equimolar Alloys -- Effect of Impact Angle on Erosion Wear Behaviours of SiCp/Cast Iron Surface Composite -- A Study on Reaction Bonded Ceramics Fabricated by Silicon Infiltration to B4C Preforms -- Fabrication of Porous SiC/SiAlON Composites Using Semi Coke and Fly Ash as Raw Material -- Prediction of the Flow Stress of a High Alloyed Austenitic Stainless Steel Using Artificial Neural Network -- Experimental Study on Intensified Leaching of Vanadium Ore -- Precipitation Behavior of High-Nitrogen Low-Nickel Austenitic Stainless Steel at Intermediate Temperature -- The Effect of Porosity of CBN Grinding Tools on Grinding Properties -- E. Biomaterials -- Modified Distillers' Grains by Microwave-Assisted Hydrolysis for Cu2+ Adsorption from Aqueous Solution -- Synthesis of Glycerol Carbonate from Biomass Glycerol: Focus on the Calcination Temperature -- Preparation and Microstructure of Biomorphic Hydroxyapatite Using Extracted Beech Wood Template -- F. Energy Related Materials, Carbon Materials -- Thermoelectric Properties of Solid-State Synthesized Magnesium Silicides Doped with Group BI-III Elements -- Influence of Composition of Gd-Doped Ceria Electrolyte on Performance of Solid Oxide Fuel Cell -- Fabrication of Novel Ag-Paste and Evaluation of its Electrical Properties in Bulk-Si Solar Cell -- Dye Sensitized Solar Cells Based on ZnO Nanorod/TiO2 Nanoparticle Composite Films -- A Study on Fabrication, Dispersion and Surface Coating of Nanocarbon for MgO-C Refractories -- Development of Nano-Carbon Bucky-Paper Membranes for Membrane Distillation.

Synthesis and Characterization of Sulfonated Poly(diphenyl ether ketone sulfone)s Containing Dibenzoylbenzene Moiety for Proton Exchange Membrane Fuel Cell.

Selected, peer reviewed papers from the 13th International Symposium on Eco-Materials Processing and Design (ISEPD-13), January 7 - 10, 2012, Guilin, China.

Description based on publisher supplied metadata and other sources.

Electronic reproduction. Ann Arbor, Michigan : ProQuest Ebook Central, 2024. Available via World Wide Web. Access may be limited to ProQuest Ebook Central affiliated libraries.