Progress in New Materials and Mechanics Research.

Intro -- Progress in New Materials and Mechanics Research -- Preface, Committees, Sponsors -- Table of Contents -- Chapter 1: Mechanics Applications -- Preliminary Research on the Measurement of Oxide Layer of ELID Based on the Laser Sensor and the Eddy Current Sensor -- Long-Term Protection Effects of Electrochemical Chloride Removal on Reinforced Concretes -- Research on the Failure Mechanism of Pitting Corrosion of the 304 Stainless Steel in Chloride Ions Environment -- Interfacial Fracture Strength of Viscoelastic Inclusions in a Polymer Blend -- Conductivity of PANI-PVA Composite Conductive Coatings with the Doping of Different Acid -- Chapter 2: Materials - Study, Modeling and Technologies -- Properties of Polyaniline with the Doping of Different Acid -- Experimental Study on Galling Behavior of Advanced High Strength Steel in Sheet Metal Forming -- Numerical Simulation of the Influence of Temperature and Pressure in CVI of C/C Composite -- The Studies on Numerical Simulation of Unidirectional Solidification Process in 23t Steel Ingot -- Dislocations in Gan Grown on Silicon -- Study on the Influence of Manufacturing Defects on Coefficient of Thermal Expansion of Plain Weave C/SiC -- Study on Friction Reduction and Wear Resistance Process and Composition of FeS Solid Lubrication Duplex Layer -- Fabricate Mould Insert with Conformal Cooling Channel Using Selective Laser Melting -- Fabrication and Characterization of Transparent Conducting ZnO: Al Films for Organic Optoelectronic Devices -- Properties of Indium Tin Oxide Films Prepared by RF Magnetron Sputtering at Different Substrate Temperatures -- Study on Dielectric Relaxation in BiFeO3/Bi3.25La0.75Ti3O12 Film -- Researched on Dielectric Properties of Alumina Substrate Material -- Study on Temperature Sensibility of Nano-Copper/Paraffin Materials.

Study on Floatability and Separation of High Ash and Difficult Floatable Coal -- Effect of Filler Loading and Temperature on Electrical Resistivity of Stainless Steel Fiber/PA6 Conductive Polymer Composites -- Study on the Optical and Electrical Properties of Organic Semiconductor Thin Films for OLEDs -- Influence of Substrate Temperature on the Characteristics of Zinc Oxide Thin Films Deposited by Magnetron Sputtering -- Luminescence Properties of Electron Trapping Material CaB4O7:Sm3+ -- The Research on the Relationship between Cauchy Integral Theorem and Complex Function Integral in Mechanics of Materials -- Cauchy Integral Formula on the Integration Path C on Singularity in Mechanics of Materials -- Luminescence Properties of Novel Red Phosphor NaSrPO4:Eu3+ -- Upconversion Luminescent Properties of YVO4:Tm3+, Ho3+, Yb3+ -- Downconversion for Solar Cells in Sr3Gd(PO4)3:Tb, Yb Phosphors -- Luminescence Properties of Ce3+ and Tb3+ Doped Strontium Pyroborate Phosphors -- First Principles Study of the Electronic Structure of In1-xGaxN -- Simulation Analysis on the Deep Drawing Property of Brake Chamber Shell -- A Formation Mechanism of X Level due to an Indium-Carbon Dimer in Silicon -- Study on Selvage Parameter Based on Silk Fabric Specifications Database -- Mixed-Solvothermal Preparation of Mace-Like CdS Nanocrystals -- Influence of Structure Unit and the Distribution on the Low-Velocity Impact Property of the 3D Woven Composites -- Effects of Feed Water Conditions on Performance of Electrodeionization Process for Removal of Ni2+ from Dilute Solution -- Study on In Situ Carbon Dioxide-Generation Flooding -- The Mathematical Model of the Relation among the Resistance, the Distortion Temperature and the Rate of the Steel in the Plastic Deformation -- Seismic Behavior of Concrete Filled Circular Steel Tubular Columns Based on Artificial Neural Network.

Bearing Capacity of Concrete Filled Square Steel Tubular Columns Based on Neural Network -- Synthesis and Properties of an New Amphoteric Retaning Agent -- Synthesis and Properties of Green Copolymer Retannage of Starch and Acrylamide with HRP/H2O2/ACAC -- Study on Dispersion Properties of an Amphoteric Polycarboxylate Superplasticizer on Cement Pastes -- Experimental Study of Thermal Conductivity of Carbon Fiber Reinforced Cement-Based Composites -- Numerical Simulation of the Effects of Scanning Velocity on the Process of Laser Transformation Hardening on the Inner Wall of Pump Barrel -- Synthesis of Acrylic High-Oil Absorption Resins -- Surface Treatment of PPTA Fiber and Properties of its Composite Materials -- Study on the Preparation of Flame-Retardant Polyacrylonitrile Fiber by Surface Modification -- Effect of Hot-Band Annealing on the Microstructure of Non-Oriented Electrical Steel Containing Copper -- Evolution of Recrystallization Texture in Non-Oriented Electrical Steel Containing Copper -- Chapter 3: Material Engineering -- An Experiment on the Surface Stability of a Liquid Bridge -- NIR-Based Wood Water Content Prediction with an Integration of ANN and PCA -- Fabrication and Ultraviolet Detection Properties of Zinc Oxide by Oxidizing Metallic Zinc at High Temperature -- Fundamental Research on Development of Liquid Crystalline Micro-Actuator -- The Effect of Gamma Ray on the Mechanical and Molecular Structure Changes of Silk Fibroin -- Research on Measurement Thickness and Growth Behaviors of Oxide Layers in Pre-Dressing Process of ELID -- Study on Modification of Raw Bamboo Fabric and Dyeing Properties -- Structure and Properties of Copolymer Tannage of Vanillin and Gallic Acid with HRP Initiation -- Study on the Shading Property of the Fabric.

Influence of Structure Parameters on Moisture Permeability of Fabric Woven by Fine PP Fiber with Star Section -- Mechanical Property and Conductivity of Polyaniline-Poly(Vinyl Alcohol)Composite Films -- Capacity Measuring Devices and Applications of Carbon Dioxide Absorption by Ammonia Water -- Improvement on Dyeing Performance of Different Bifunctional Reactive Dyes for Soybean Protein Fibers -- The Red-Emitting Phosphor of Sm3+-Doped Y2Si4N6C -- Mixture Calculation of Chromium Ore Smelting Reduction Process in a Converter -- Effects of Sodium Citrate on MAO Process and Characteristics of Coatings Fabricated on AZ91D Magnesium Alloy -- Lost Foam Casting Coating in Production of Cylinder Block -- The Influence Faction to the Crude Oil Emulsion Stability -- Filling Characteristics of Magnesium Alloy Molten Metal in Squeeze Casting -- Effect of Surface Roughness on Nanocontact: Quasicontinuum Simulation -- Chapter 4: Applied Mechanics and Mechanical Engineering -- Numerical Simulation of Water-Lubricated Rubber/Chromium Coating Pair Test -- Study of Torsion Spring's Parameters with Angular Type Grippers -- Feasibility Analysis on Application of Nonstandard Casing in PuGuang Gas Field -- Optimum of Drawbead Design and Restraining Forces by Sensitivity Analysis Method Combined with Inverse Approach in Sheet Metal Forming Process -- A Study on the Application of Design Thinking Strategy to Form Generation System -- The Dynamic Dual Vector Finite Element Method for Electromagnetic Waveguide Problem -- Numerical Simulation for Temperature Variability of the Stable Transported Hot Oil Pipeline -- The Rolling Forming Principle and the Deformation Analysis of the Ring Multi-Mandrel Roller -- Research on the Fatigue Strength Test of 20CrMnMo Carburized and Quenched Gears.

Differential Evolution Algorithm with Hybrid Discrete Variables and its Application to Mechanical Optimization -- The Optimal Design of Vertical Hammer Mill Based on Pro/E -- Study on Friction Heat and Force about Friction Forming Hole -- Spin Injection in a Ferromagnetic/Organic System -- Research on NC Relieving of Annular Worm Gear Hob -- Optimal Design of the Dynamic Gear Flowmeter -- Finite Element Analysis of Deformation and Flow of Two-Way Cartridge Valve under Different Pressures -- The Stability of Premixed Flame on Water-Cooled Copper Slot -- Study on Vibration Absorption of New-Energy Autos Batteries' Cooling Fan -- The Influence of Projectile Structure on the Trajectory Stability of Oblique Penetration Concrete -- Parameter Study of Concrete Impact Damage Model Based on DOE Analysis -- The Experimental Research on the Effect of Age on Bond Behavior between Deformed Bar and Shale Ceramic Concrete -- Optimization of Balloon-Stent System Based on Nonlinear Material Using Kriging Surrogate Model -- Research on Reliability Evaluation Method of Casing in High Level Acid Gas Field -- Influence of Material Thickness to the Dynamic Mechanical Properties of Bioprosthetic Heart Valve -- Keywords Index -- Authors Index.

Selected, peer reviewed papers from the 2012 International Conference on Computer-Aided Material and Engineering 2012 (ICCME 2012), March 17-18, 2012, Hangzhou, China.

Description based on publisher supplied metadata and other sources.

Electronic reproduction. Ann Arbor, Michigan : ProQuest Ebook Central, 2024. Available via World Wide Web. Access may be limited to ProQuest Ebook Central affiliated libraries.