TY - BOOK AU - Maňková,Lucia AU - Hanuliak,Peter TI - EnviBUILD Buildings and Environment 2013 T2 - Advanced Materials Research Series SN - 9783038264217 AV - TH453 .E585 2014 U1 - 690 PY - 2014/// CY - Zurich PB - Trans Tech Publications, Limited KW - Buildings-Performance-Congresses KW - Electronic books N1 - Intro -- EnviBUILD Buildings and Environment 2013 -- Preface -- Table of Contents -- Chapter 1: Energy Efficient Buildings -- Analysis of Energy and Internal Environment Improvements in a Single Family House -- Application of BIM Process by the Evaluation of Building Energy Sustainability -- Comparison of Simulated and Actual Energy Use of a Hospital Building in Austria -- Energy Consumption and CO2 Emission of Buildings Built with Industrialized Technology: The Case of Debrecen and Future Trends -- Evaluation of Energy Efficiency in Retrofitting Residential Buildings with Large-Panel Structures -- Exergy Quality of Buildings -- Indoor Environment and Energy Performance of Office Buildings Equipped with a Low Temperature Heating / High Temperature Cooling System -- House in Passive Standard - Thermal Bridges -- Interaction of New Physical-Energy Quantification of Buildings and Renewable Energy Sources as a Dominant Production Technology of Natural Capital -- Nearly Zero-Energy Requirements and the Reference Buildings -- The Effects of the Soils Thermal Field onto the Energy Performance of Buildings -- Thermal Bridges Minimizing through Typical Details in Low Energy Designing -- Thermal Bridges Minimizing through Window Jamb in Low Energy Buildings -- Thermal Comfort in a Refurbished Low-Energy House: The OEKOHAUS Case Study -- Total Solar Energy Transmittance vs. Dynamic Thermal Characteristics of Non-Transparent Building Components -- Transformation Determinants of Existing Urban Hotels while Taking into Account all Aspects of Sustainable Development -- Cost Optimality and/or Sustainability in our Building's Life -- Optimization of Building Envelope Components Based on Life Cycle Environmental Impacts and Costs -- Building Sector & -- Climate Change: The Case of Hungary -- Chapter 2: Heat Storage and Energy Savings; Alternative Way of Thermal Protection by Thermal Barrier -- Determination of Linear Thermal Transmittance for Curved Detail -- Determining Cumulative Room Temperature under In Situ Conditions Using Combined Method -- Energy Design by Evolution: Applying Evolutionary Computing to Energy Efficient Architectural Design -- Experimental Measurements and Numerical Simulations of Dynamic Thermal Performance of External Timber Frame Wall -- Hot Water Temperature Drop in a Pipe as a Parameter in Order to Define Operation Time of a Circulation Loop in Domestic Hot Water Distribution System -- Impact of Façade Colouring on Temperature and Light Conditions of Buildings, Housing Estates, and Environment -- Improvements of Energy Balance of Existing Residential Buildings -- Low Energy Source Synthetic Thermal Energy Storage (STES) -- Numerical Analysis and Measurement Results of a Window Sill -- Optimization of Swimming Pool Hall's Envelope with Respect to Thermal and Moisture Design -- Possibilities of Simulations in the Planning of the Retrofit of Historical Double Skin Windows -- The Impact of the Choice of Computational Methods on the Results of Simulations of Specific Heat Consumption for Heating a Family House -- The Influence of Construction Fillings of Building on Airtightness -- The Influence of the Position of Windows on ΔU Value -- The Natural Physical Cavity Energy Regime of Double-Skin Facade -- Thermal and Moisture Problems of Wooden Windows -- Windows in Buildings - Diagnostics of Selected Properties after Time of Using -- Wooden Window Structure and its Thermo-Humid Mode -- Thermal Properties of Wooden Buildings in Relation to Computer Software -- Chapter 3: Integration of Renewable Energy Sources -- A Software Optimization of the Solar Energy System Performance; Comparison of Modelled Distribution of Thermal Fields at Seasonal Ground Storage Segments -- Construction in the Trend of Sustainability_Wooden Houses with Integrated Photovoltaic Systems -- Electricity Storage in Passive House in Central Europe Region -- Evaluation of Possible Use of Foliage as a Fuel for Small Combustion Equipment -- Photovoltaic Arrays on Flat Roofs - An Aspect of Yearly Energy Production -- Chapter 4: Effective Ventilation -- A New Type of Heat Exchanger for Ventilation in Buildings with Nearly-Zero Energy Consumption -- CFD Model of an Underfloor Air Cavity Created from Special Fittings and its Verification Using a Laboratory Model -- Comparison of the Impact of the Ventilation Ducts on Thermal Properties of the Exterior Walls -- Experimental Verification of Air Quality in Primary Schools -- Impact of the Installed Inlet Vent Flaps in the Window Structure on the Overall Aerodynamic Properties of the Window -- Natural Ventilation and Forced Warm Air Ventilation in Offices -- The Effect of Air Condition on Reduction of CO2 Concentration in Buildings in Family Houses -- Chapter 5: Quality of Indoor Environment -- Analysis of Summer Overheating in Elementary School Building -- Architecture and the Internal Environment in the Current Office Buildings - Environmental Aspects -- Case Study of Light Pollution in Urbanized Area of Slovakia -- Colour of External Shading Obstacles and Circadian Stimulus of Indoor Daylighting -- Comparative Study of Window Glazing Systems Influence on Melatonin Secretion in Patients in the Hospital Wards -- Design as a Tool for Environmental Therapy in the Fight against Lifestyle Diseases -- Design of Balcony from the Point of View of Daylighting -- Design of School Environment in the 21st Century -- EN Criteria for Evaluation of Daylight in Interiors; Evaluation of Thermal Environment and Indoor Air Quality in University Libraries in Vienna -- Impact of the New CEN Minimum Illuminance Criterion on the Working Plane Size -- Influence of Instantaneous Measured Data on Evaluation Interval of Daylighting -- Interior Environment of the Buildings Hit by Floods -- Shading by Surrounding Obstacles -- Sunlight Penetration through Sloped Window Apertures -- Thermal Stability of the Summer Period in Schoolrooms -- Assessment of Daylighting Design Tools Against Test Cases Included in CIE's 171:2006 Report -- Exploring the Contact Comfort within Complex Well-Being in Microenvironment -- Chapter 6: Natural and Environmental Friendly Building Materials -- Air-Tightness and Acoustic Properties of SuperAdobe System -- Building Physical, Energetical and Hygrothermal Analysis of Earth-Sheltered Building Constructions -- Calculation and Experimental Evaluation of the Thermal Resistance of a Structure with Reflective Insulation -- Comparison of the Thermal Properties of Different Insulating Materials -- Controlling and Testing of the Uneven Wall Surface -- Correlation Relationships between Properties of Brick Body and their Use in Building Practice -- Impact of Concrete Recycled Materials on some Properties of Concrete -- Improving the Thermal Insulation Properties of Brick Products Using Chemical Additive Vuppor -- Influence of Fluidized Fly Ash on the Selected Physical-Mechanical Properties of the Autoclaved Aerated Concrete -- Microclimatic Effects of Green Facades in Urban Environment -- Microorganism on the Fasades of Residential Panel Housing -- Possibilities of Thermal Analysis for the Evaluation of Construction Materials -- Risk Analysis of Asbestos Structures and their Impact on the Internal Environment of Buildings -- Study of the Properties of the Environmentally Friendly Insulation Materials; The Assessment of the Refurbished Reinforced Concrete Buildings in Point of the Climate Change -- The Transition of the Water Steam through the Composition of the Diffusive Closed Circumferential Wall of the Wooden House with the Proper and Improper Realization of Vapor Barrier -- Thermal Properties of Selected Lightweight Wooden Walls and Windows in the Regime of Long Time Testing -- Timber as Renewable Building Material and its Use in Modern Architecture -- Timber - Traditional Material History or Vision in Architectural Design -- Transient Pulse Method for Measuring of Heat Conductivity of Autoclaved Aerated Concrete -- Ultra Thin Glass Membranes for Advanced Glazing of nZEB -- Use of Multi-Criteria Optimization for Selection of Building Materials for Reconstruction -- Application of Phase Change Materials to Reduce the Risk of Overheating of Building Interior -- Chapter 7: Acoustic Design and Noise Protection -- Door Bottom Joint Design and its Influence on Sound Transmission of the Door -- Effect of Acoustic Pads' Different Dynamic Stiffness on the Reduction of Impact Sound Level -- Influence of Double Transparent Facades on Acoustic Comfort at the Workplace -- Mockup Investigation of Lightweight Timber Floor -- Simulation of Different Acoustic Lecture Room Designs -- Sound Insulation Properties of the Facade Elements - The Influence of Filling Cavities of Facade Elements on the Values of Laboratory Airborne Sound Insulation -- The Dispersion of Acoustic Energy in the Dissemination from the Source -- The Assessment of Sports Halls - The Analysis of Reverberation Time, Strength and Clarity -- Chapter 8: Fire Protection, Risk Analysis -- A Case Study of the Fire-Resistance of Traditional Brick Vaults -- Application of Risk Analysis by the Evaluation of Buildings Indoor Environment; Assessment and Damage for Building Structures Risk Analysis Methods N2 - Selected, peer reviewed papers from the EnviBUILD 2013, Buildings and Environment, October 17, 2013, Bratislava, Slovakia UR - https://ebookcentral.proquest.com/lib/orpp/detail.action?docID=1910737 ER -