Testing and Evaluation of Inorganic Materials V.
Bao, Yi Wang.
Testing and Evaluation of Inorganic Materials V. - 1st ed. - 1 online resource (555 pages) - Key Engineering Materials Series ; v.Volume 633 . - Key Engineering Materials Series .
Intro -- Testing and Evaluation of Inorganic Materials V -- Preface -- Table of Contents -- Chapter 1: Chemical Composition, Microstructure, Physical Properties and Technologies of Producing and Processing of Inorganic Materials -- Influence of Mixing Environmental Conditions on Flowability of Lactose Blends -- Preparation of Xonotlite Nano-Fibres Using the Silica Source from Coal Fly Ash and Ca(OH)2 -- Characterization of Co-Modified γ-Fe2O3 Based Composite Nanoparticles -- Synthesis of Spherical Nano-Hydroxyapatite by Hydrothermal Method with L-Lysine Template -- Synthesis and Performance Characterization of Highly Active Samarium Doped TiO2 Nanopowder -- Preparation and Characterization of Wire-Liked NiFe2O4 Nanoparticles with High Specific Area and Excellent Magnetic Properties via a Template-Assembled Sol-Gel Method -- Aqueous Gelcasting Synthesis of Zirconium Diboride -- Preparation of Nano-Sized Wollastonite Using Calcium Silicate Residue of Potassium Feldspar after Extraction of Potassium and Alumina -- Improved Efficiency of TiO2 Nanotube Arrays with TiCl4 Treatment in Dye-Sensitized Solar Cells -- Microstructure Analysis of SiC Ceramic Support by Isostatic Processing -- Effects of Nb2O5/La2O3 Synergistic Modification on Phase Composition, Microstructure and Mechanical Properties of Al2O3 Ceramics Prepared by Microwave Sintering -- Influence of Si3N4 Adding on the Performance of Al-Al2O3 Composite -- Influence of Aluminum Contents on Phase Behavior and Properties of TiN-Sialon-Corundum Composites by Aluminothermic Reduction Nitridation -- Effect of Mineral Composition and Sintering Temperature on the Synthetic Cordierite -- The Effects of Mineral Composition and Sintering Temperature on Synthetic Mullite -- Surface Densification of Silica Ceramic -- Preparation and Characterization of Layered Rare Earth Compound. Synthesis and Characterization of Ce0.5Zr0.5O2 Nanocomposite and its Supported Pd-Only Catalysis Activity -- Microstructure and Properties of Ti(C,N)-Based Cermets -- The Properties of Plastic Phase Mullite-SiC Bricks and its Utilization in Cement Kilns -- Densification Behavior and Microstructure Evolution of LTCC Film Constrained by Rigid Substrate -- Sulfate-Ion Pillared Layered Hydroxide of Eu2(OH)4SO4·nH2O: Controlled Hydrothermal Processing, Thermal Decomposition, and Photoluminescence -- Synthesis and Photo-Catalytic Performance of ZnO/Graphene Composites -- Etching Morphology of Vitreous Silicon Dioxide in HF-Based Solution -- Preparation of Porous Hydroxylapatite Using Polystyrene Microspheres as Pore Former -- Performance and Phase Behavior of Quartz-Aluminum Matrix Composites -- Effect of Cerium on Manganese Base Catalysts by Co-Precipitation for Low-Temperature SCR of NO with NH3 -- A Novel Approach of Reusing Kerf Loss Wastes in Preparation of β-SiC/Si2N2O Bonded SiC Refractory -- A Study on the Influence of Coarse Aggregate on Rheological Properties of Self-Compacting Concrete -- Preparation and Property of the Steel Fiber Concrete Modified by Acrylic Acid Emulsion -- Penetration of Chlorine Ion in Concrete under the Coupling Effect of the Continues Pressure Load and the Corrosion Environment -- Preparation and Properties of Low-Temperature Glaze Used in Coke Oven Cordierite Bricks -- Calcium Carbonate Bio-Deposition Technique by Using Fine Waste Mortar Particles as Bacteria-Immobilization Medium -- Identification and Assessment of Natural Sodium Bentonite -- Structural and Mineralogical Characterization of Green Nephrite in Hetian, Xinjiang, China -- Loess Based Copolymer Composite for Removing Basic Fuchsin -- Factors on Leaching Zinc and Copper from Zinc Leach Residue. The Microstructure Evolution of AA7050 in the Process of Homogenization -- Study of Evolution Rule of Aggregates in Ceramic Suspension -- Thermodynamic Analysis of Chemical Vapor Deposition Progress for SiC Coatings -- Influence of Reinforcing Phase on the Oxidation Model of ZrB2 Based Multi-Phase Ceramics -- Microstructure and Properties of Al2O3-ZrO2 Ceramics Prepared by Microwave Sintering -- Defect Control and Interfacial Microstructure of Laminated Composites of TiB2-Based Ceramic to 1Cr18Ni9Ti Stainless Steel by Reaction Fusion Bonding -- The Effects of Sulfate Anion Exchange on Structural Feature and Thermal Behavior of Y2(OH)5NO3nH2O Layered Hydroxide Nanosheets -- Influences of Working Power on Properties for Boron Films Deposited by R. F. Magnetron Sputtering -- Effects of V2O5 and ZrO2 on Chipping Ratio of MnZn Ferrite Core -- Effect of Boric Acid on the Properties of Magnesium Slag Powder -- Influence of Laser Ablation on the Oxygen Permeability of Ba0.5Sr0.5Co0.8Fe0.2O3-δ Membranes -- The Hydro-Thermal Stability of Hornblende Syenite in NaOH Solution -- Influence of Cooling Ways on the Structure and Hydraulic Activity of Blast Furnace Slag -- Influence of SiO2/Al2O3 Content on Structure and Hydration Activity of Granulated Blast Furnace Slag -- Performance Studies on In Situ Spinel Solid Solution Bonded Periclase Refractories -- Effect of Mullite Homogenized Grogs on the Properties of Mullite-SiC Bricks -- Preparation and Luminescence Properties of SrMoO4 Doped with Pr3+ -- Electrical Characterization and Microstructures of Bi4-xGdxTi3O12 Thin Films -- Effect of Gd Substitution on Electrical Characteristics and Microstructures of Bi4Ti3O12 Ceramics -- Ferroelectric Properties and Microstructures of Tb2O3-Doped Bismuth Titanate Ceramics -- Effects of the Substrate Temperature on the Structure and Properties of Cd1-xMnxTe Films. Effect of pH Value on the Properties of SnO2 Nano-Cystalline for Dye Sensitized Solar Cells -- Correlation between Light Response Uniformity and Longitudinal Transmission in 600 mm BGO Crystals -- Ice-Formation Expansion of Salt Solution and its Effect on Frost Damage of Concrete -- Influence of Different Diameters and Materials of Posts on the Fracture Resistance of Endodontically Treated Teeth -- Effect of Annealing Temperature on the Structures and Properties of Bi4.15Nd0.85Ti3FeO15 Thin Films -- Effect of Maitenance Technology on the Properties of Quartz Sand Unfired Porous Materials -- Performance Study on Masonries of Different Aerated Concrete Blocks -- TiO2 Added Zn-Bi Based Varistors: Microstructure, I-V, Flow and Aging Characteristics -- Effect of Pr6O11 Doping on the Microstructural and Electrical Properties of ZnO-Pr6O11-Co3O4-Cr2O3-SnO2 Varistors -- The Synergistic Effects of Freeze-Thaw, Salt Attack and Bending Stress on Behavior of Reinforced Concrete -- Effect of Al2O3 on Surface Tension of the SiO2-Al2O3-RO-R2O Glass System -- Characterization of Swept Synthetic High Quality Quartz Crystal -- The Effect of pH Value of Plating Bath on the Properties of Electroless Ni-P Coating on Phenolic Plastic Substrate -- Mechanical and Adiabatic Properties of Silica Aerogel Doped with TiO2 Nanowire -- The Effect of LnAlO3(Ln=Nd,Sm) Additives on the Microwave Dielectric Properties of BaO-Nd2O3-5TiO2 Ceramics -- Glass Forming Ability and Luminescent Properties of P2O5-ZnO-SrO System Glasses -- Effect of MgAl2O4 Micrpowder on Physical Properties of Corundum Castables -- Surface Properties of Dental 3Y-TZP with Different Treatments -- Ballistic Performance of Laminated Composite with TiB2 Based Ceramic to Ti-6Al-4V Alloy in Continuously-Graded Microstructure -- Ferroelectric Properties of Bi3.25Ho0.75Ti2.97V0.03O12. Electrical Characterization and Microstructures of Bi4-xDyxTi3O12 Ceramics -- Electrical Characteristics and Microstructures of Pr2O3-Doped Bi4Ti3O12 Thin Films -- Ferroelectric Properties of Bismuth Titanate Ceramics by Tm2O3/V2O5 Substitution -- Ferroelectric Properties and Microstructures of Bi4-xDyxTi3O12 Thin Films -- Ferroelectric Characteristics of Bi4-xPrxTi3O12 Ceramics -- Ferroelectric Properties of Bismuth Titanate Ceramics by Tb2O3/V2O5 Substitution -- The Effect of La Substitution on the Ferroelectric Properties of Bi4Ti3O12 Ceramics -- Effect of Sc2O3/V2O5 Substitution on the Ferroelectric Properties of Bi4Ti3O12 Ceramics -- The Influence of Pulse Width on Microstructure and Mechanical Properties of CrNx Coatings Deposited by HPPMS -- Influence of HF-SCG Immersion Treatment on Corrosion Resistance of the Ultrasonic Micro-Arc Oxidation Bio-Coating on Pure Magnesium -- Ionic Conductivity and Coordination Number of Cations in Ce1-xYxO2-x/2 -- Advances in Deformation Performance of Concrete with Steel Slag and Scrap Tire Particles -- The Effect of n-TiO2 on Corrosion and Biological Activity of Biocoatings Coated by Ultrasound Micro-Arc Oxidation on Pure Magnesium -- Effect of Gd2O3/BaF2 Addition on Dielectric Behavior and Energy Storage Properties of Strontium Barium Niobate Glass-Ceramics -- Fracture Features of Mullite Ceramic Regenerative Material under Thermal Shock Condition -- Advances in Hygro-Thermal Deformation of Concrete Material -- Chapter 2: Techniques and Devices for Analysis and Testing of Materials Properties -- Analyze the Growth Habit of Mullite Nanocomposites by First-Principles Calculations -- A Proposed Solution to Quantitative Phase Analysis of Mullite -- A New Method for Determining Strength and Fracture Toughness of Ceramic Materials in Air at 1500-2000 °C. Creep Behavior of Building Silicone Sealant under Long-Term External Loading and its Time-Stress Equivalence.
Selected, peer reviewed papers from the Proceedings of the Fifth Annual Meeting on Testing and Evaluation of Inorganic Materials, April 16-18, 2014, Guiyang, China.
9783038267171
Materials-Testing-Congresses.
Ceramics-Testing-Congresses.
Glass-Testing-Congresses.
Concrete-Testing-Congresses.
Electronic books.
TA410 .M44 2014
Testing and Evaluation of Inorganic Materials V. - 1st ed. - 1 online resource (555 pages) - Key Engineering Materials Series ; v.Volume 633 . - Key Engineering Materials Series .
Intro -- Testing and Evaluation of Inorganic Materials V -- Preface -- Table of Contents -- Chapter 1: Chemical Composition, Microstructure, Physical Properties and Technologies of Producing and Processing of Inorganic Materials -- Influence of Mixing Environmental Conditions on Flowability of Lactose Blends -- Preparation of Xonotlite Nano-Fibres Using the Silica Source from Coal Fly Ash and Ca(OH)2 -- Characterization of Co-Modified γ-Fe2O3 Based Composite Nanoparticles -- Synthesis of Spherical Nano-Hydroxyapatite by Hydrothermal Method with L-Lysine Template -- Synthesis and Performance Characterization of Highly Active Samarium Doped TiO2 Nanopowder -- Preparation and Characterization of Wire-Liked NiFe2O4 Nanoparticles with High Specific Area and Excellent Magnetic Properties via a Template-Assembled Sol-Gel Method -- Aqueous Gelcasting Synthesis of Zirconium Diboride -- Preparation of Nano-Sized Wollastonite Using Calcium Silicate Residue of Potassium Feldspar after Extraction of Potassium and Alumina -- Improved Efficiency of TiO2 Nanotube Arrays with TiCl4 Treatment in Dye-Sensitized Solar Cells -- Microstructure Analysis of SiC Ceramic Support by Isostatic Processing -- Effects of Nb2O5/La2O3 Synergistic Modification on Phase Composition, Microstructure and Mechanical Properties of Al2O3 Ceramics Prepared by Microwave Sintering -- Influence of Si3N4 Adding on the Performance of Al-Al2O3 Composite -- Influence of Aluminum Contents on Phase Behavior and Properties of TiN-Sialon-Corundum Composites by Aluminothermic Reduction Nitridation -- Effect of Mineral Composition and Sintering Temperature on the Synthetic Cordierite -- The Effects of Mineral Composition and Sintering Temperature on Synthetic Mullite -- Surface Densification of Silica Ceramic -- Preparation and Characterization of Layered Rare Earth Compound. Synthesis and Characterization of Ce0.5Zr0.5O2 Nanocomposite and its Supported Pd-Only Catalysis Activity -- Microstructure and Properties of Ti(C,N)-Based Cermets -- The Properties of Plastic Phase Mullite-SiC Bricks and its Utilization in Cement Kilns -- Densification Behavior and Microstructure Evolution of LTCC Film Constrained by Rigid Substrate -- Sulfate-Ion Pillared Layered Hydroxide of Eu2(OH)4SO4·nH2O: Controlled Hydrothermal Processing, Thermal Decomposition, and Photoluminescence -- Synthesis and Photo-Catalytic Performance of ZnO/Graphene Composites -- Etching Morphology of Vitreous Silicon Dioxide in HF-Based Solution -- Preparation of Porous Hydroxylapatite Using Polystyrene Microspheres as Pore Former -- Performance and Phase Behavior of Quartz-Aluminum Matrix Composites -- Effect of Cerium on Manganese Base Catalysts by Co-Precipitation for Low-Temperature SCR of NO with NH3 -- A Novel Approach of Reusing Kerf Loss Wastes in Preparation of β-SiC/Si2N2O Bonded SiC Refractory -- A Study on the Influence of Coarse Aggregate on Rheological Properties of Self-Compacting Concrete -- Preparation and Property of the Steel Fiber Concrete Modified by Acrylic Acid Emulsion -- Penetration of Chlorine Ion in Concrete under the Coupling Effect of the Continues Pressure Load and the Corrosion Environment -- Preparation and Properties of Low-Temperature Glaze Used in Coke Oven Cordierite Bricks -- Calcium Carbonate Bio-Deposition Technique by Using Fine Waste Mortar Particles as Bacteria-Immobilization Medium -- Identification and Assessment of Natural Sodium Bentonite -- Structural and Mineralogical Characterization of Green Nephrite in Hetian, Xinjiang, China -- Loess Based Copolymer Composite for Removing Basic Fuchsin -- Factors on Leaching Zinc and Copper from Zinc Leach Residue. The Microstructure Evolution of AA7050 in the Process of Homogenization -- Study of Evolution Rule of Aggregates in Ceramic Suspension -- Thermodynamic Analysis of Chemical Vapor Deposition Progress for SiC Coatings -- Influence of Reinforcing Phase on the Oxidation Model of ZrB2 Based Multi-Phase Ceramics -- Microstructure and Properties of Al2O3-ZrO2 Ceramics Prepared by Microwave Sintering -- Defect Control and Interfacial Microstructure of Laminated Composites of TiB2-Based Ceramic to 1Cr18Ni9Ti Stainless Steel by Reaction Fusion Bonding -- The Effects of Sulfate Anion Exchange on Structural Feature and Thermal Behavior of Y2(OH)5NO3nH2O Layered Hydroxide Nanosheets -- Influences of Working Power on Properties for Boron Films Deposited by R. F. Magnetron Sputtering -- Effects of V2O5 and ZrO2 on Chipping Ratio of MnZn Ferrite Core -- Effect of Boric Acid on the Properties of Magnesium Slag Powder -- Influence of Laser Ablation on the Oxygen Permeability of Ba0.5Sr0.5Co0.8Fe0.2O3-δ Membranes -- The Hydro-Thermal Stability of Hornblende Syenite in NaOH Solution -- Influence of Cooling Ways on the Structure and Hydraulic Activity of Blast Furnace Slag -- Influence of SiO2/Al2O3 Content on Structure and Hydration Activity of Granulated Blast Furnace Slag -- Performance Studies on In Situ Spinel Solid Solution Bonded Periclase Refractories -- Effect of Mullite Homogenized Grogs on the Properties of Mullite-SiC Bricks -- Preparation and Luminescence Properties of SrMoO4 Doped with Pr3+ -- Electrical Characterization and Microstructures of Bi4-xGdxTi3O12 Thin Films -- Effect of Gd Substitution on Electrical Characteristics and Microstructures of Bi4Ti3O12 Ceramics -- Ferroelectric Properties and Microstructures of Tb2O3-Doped Bismuth Titanate Ceramics -- Effects of the Substrate Temperature on the Structure and Properties of Cd1-xMnxTe Films. Effect of pH Value on the Properties of SnO2 Nano-Cystalline for Dye Sensitized Solar Cells -- Correlation between Light Response Uniformity and Longitudinal Transmission in 600 mm BGO Crystals -- Ice-Formation Expansion of Salt Solution and its Effect on Frost Damage of Concrete -- Influence of Different Diameters and Materials of Posts on the Fracture Resistance of Endodontically Treated Teeth -- Effect of Annealing Temperature on the Structures and Properties of Bi4.15Nd0.85Ti3FeO15 Thin Films -- Effect of Maitenance Technology on the Properties of Quartz Sand Unfired Porous Materials -- Performance Study on Masonries of Different Aerated Concrete Blocks -- TiO2 Added Zn-Bi Based Varistors: Microstructure, I-V, Flow and Aging Characteristics -- Effect of Pr6O11 Doping on the Microstructural and Electrical Properties of ZnO-Pr6O11-Co3O4-Cr2O3-SnO2 Varistors -- The Synergistic Effects of Freeze-Thaw, Salt Attack and Bending Stress on Behavior of Reinforced Concrete -- Effect of Al2O3 on Surface Tension of the SiO2-Al2O3-RO-R2O Glass System -- Characterization of Swept Synthetic High Quality Quartz Crystal -- The Effect of pH Value of Plating Bath on the Properties of Electroless Ni-P Coating on Phenolic Plastic Substrate -- Mechanical and Adiabatic Properties of Silica Aerogel Doped with TiO2 Nanowire -- The Effect of LnAlO3(Ln=Nd,Sm) Additives on the Microwave Dielectric Properties of BaO-Nd2O3-5TiO2 Ceramics -- Glass Forming Ability and Luminescent Properties of P2O5-ZnO-SrO System Glasses -- Effect of MgAl2O4 Micrpowder on Physical Properties of Corundum Castables -- Surface Properties of Dental 3Y-TZP with Different Treatments -- Ballistic Performance of Laminated Composite with TiB2 Based Ceramic to Ti-6Al-4V Alloy in Continuously-Graded Microstructure -- Ferroelectric Properties of Bi3.25Ho0.75Ti2.97V0.03O12. Electrical Characterization and Microstructures of Bi4-xDyxTi3O12 Ceramics -- Electrical Characteristics and Microstructures of Pr2O3-Doped Bi4Ti3O12 Thin Films -- Ferroelectric Properties of Bismuth Titanate Ceramics by Tm2O3/V2O5 Substitution -- Ferroelectric Properties and Microstructures of Bi4-xDyxTi3O12 Thin Films -- Ferroelectric Characteristics of Bi4-xPrxTi3O12 Ceramics -- Ferroelectric Properties of Bismuth Titanate Ceramics by Tb2O3/V2O5 Substitution -- The Effect of La Substitution on the Ferroelectric Properties of Bi4Ti3O12 Ceramics -- Effect of Sc2O3/V2O5 Substitution on the Ferroelectric Properties of Bi4Ti3O12 Ceramics -- The Influence of Pulse Width on Microstructure and Mechanical Properties of CrNx Coatings Deposited by HPPMS -- Influence of HF-SCG Immersion Treatment on Corrosion Resistance of the Ultrasonic Micro-Arc Oxidation Bio-Coating on Pure Magnesium -- Ionic Conductivity and Coordination Number of Cations in Ce1-xYxO2-x/2 -- Advances in Deformation Performance of Concrete with Steel Slag and Scrap Tire Particles -- The Effect of n-TiO2 on Corrosion and Biological Activity of Biocoatings Coated by Ultrasound Micro-Arc Oxidation on Pure Magnesium -- Effect of Gd2O3/BaF2 Addition on Dielectric Behavior and Energy Storage Properties of Strontium Barium Niobate Glass-Ceramics -- Fracture Features of Mullite Ceramic Regenerative Material under Thermal Shock Condition -- Advances in Hygro-Thermal Deformation of Concrete Material -- Chapter 2: Techniques and Devices for Analysis and Testing of Materials Properties -- Analyze the Growth Habit of Mullite Nanocomposites by First-Principles Calculations -- A Proposed Solution to Quantitative Phase Analysis of Mullite -- A New Method for Determining Strength and Fracture Toughness of Ceramic Materials in Air at 1500-2000 °C. Creep Behavior of Building Silicone Sealant under Long-Term External Loading and its Time-Stress Equivalence.
Selected, peer reviewed papers from the Proceedings of the Fifth Annual Meeting on Testing and Evaluation of Inorganic Materials, April 16-18, 2014, Guiyang, China.
9783038267171
Materials-Testing-Congresses.
Ceramics-Testing-Congresses.
Glass-Testing-Congresses.
Concrete-Testing-Congresses.
Electronic books.
TA410 .M44 2014