Engineering and Innovative Materials III.
Sikora, Axel.
Engineering and Innovative Materials III. - 1st ed. - 1 online resource (290 pages) - Advanced Materials Research Series ; v.Volume 1043 . - Advanced Materials Research Series .
Intro -- Engineering and Innovative Materials III -- Preface and Committees -- Table of Contents -- Chapter 1: Structure and Properties of Materials -- Nano-Yttrium Aluminium Garnet Interfacial Tension and Viscosity for Enhanced Oil Recovery -- A Study of LiMn(2-X)FexO4 Cathodic Nano Material for Lithium-Ion Batteries -- Effect of Cell Material on the Performance of PV System -- The Influence of Carbon Addition on Microstructure and Mechanical Properties of Fe-22.0Al-5.0Ti Alloy -- Zinc Oxide Nanostructures Formed by Wet Oxidation of Zn Foil -- Effect of CNT Arrays on Electrical and Thermal Conductivity of Epoxy Resins -- Investigation on Microstructure and Mechanical Properties of Squeeze Cast Al-Si Alloys by Numerical Simulation -- FTIR and Electrical Studies of Hexanoyl Chitosan-Based Nanocomposite Polymer Electrolytes -- In2O3-Based Thin Films Deposited by Spray Pyrolysis as Promising Thermoelectric Material -- Solid Particle Erosion Behaviour of Martensitic and Nitrogen Alloyed Austenitic Stainless Steel -- Porous GaN for Gas Sensing Application -- Diode Parameters of Heterojunctions Comprising p-Type Si Substrate and n-Type β-FeSi2 Thin Films -- Chapter 2: Research and Development of Technologies of Synthesis and Processing of Materials -- Optimization of Multi-Pass Pocket Milling Parameter Using Ant Colony Optimization -- Investigation of Carbon Nanofiber Supported Iron Catalyst Preparation by Deposition Precipitation -- Hydrophobic-Synthesis of Bio-Based Epoxy Substrate Using Methyl Ester and its Dust Deposition and Decontamination Effects -- Synthesis and Characterization of Octaethoxycalix[4]Arene for Heavy Metal Cations Adsorbent -- Recycling of Pre-Fabricated Carbon-Fiber Waste as Filler for Sandwich Glass-Fiber Auto Parts -- Prediction of Friction Stir Processed AZ31 Magnesium Alloy Micro-Hardness Using Artificial Neural Networks. Fabrication of ZnO Nanorod for Room Temperature NO Gas Sensor -- Synthesis of Co/CNTs via Strong Electrostatic Adsorption: Effect of Metal Loading -- Water Dispersion Conductive Polypyrrole Based on Nanocrystalline Cellulose -- Electroless Deposition of Silver Nanoparticles and Nanowires in Ethylene Glycol -- Electroless Deposition of Copper Nanostructures in Aqueous Solution -- Finite Element Study of Deformation Behaviour of Al-6063 Alloy Developed by Equal Channel Angular Extrusion -- Electrochemical Characteristics of an Optimized Ni-P-Zn Electroless Composite Coating -- Synthesis of C-2-Ethoxycarbonylmethoxyphenyl Calix[4]Resorcinarene Using Salicylaldehyde as Basic Material and its Application as Adsorbent of Pb(II) Metal Cation -- Simulating of Backward Extrusion Process of Nanostructured Al-6082 Material -- Glass Ceramization as an Alternative Production Route of Forsterite Glass-Ceramics for Possible Multipurpose Uses -- Relative Effect of Sand Blasting and Acid Etching on the Surface Roughness of Pure Titanium and Titanium Alloy for Dental Implants -- The Breakdown of Carbide Network in a H23 Tool Steel by Hot Axisymmetric Compression -- Cementite Precipitation of a H21 Tool Steel after Hot Compression and Double Temper -- Solidification Behaviour of a H21 Tool Steel -- Experimental Investigation of Effect of Rotary Abrasive Jet Nozzle on Coating Removal Rate and Surface Finish -- Chapter 3: Environmental Chemistry and Practice of Using the Nature Materials -- Methane Adsorption on Chemically Modified Microwave Irradiated Palm Shell Porous Carbon -- Biopulping by Ceriporiopsis subvermispora towards Pineapple Leaf Fiber (PALF) Paper Properties -- Hydrophobicity Characterization of Bio-Wax Derived from Taro Leaf for Surface Coating Applications -- In Situ Deposition of Conducting Polymer onto Pineapple Leaf Fiber. Characteristics of Potassium Acetate - Activated Coconut Shell Carbon -- Synthesis of Zeolite A from Coal Fly Ash by Alkali Fusion and Hydrothermal -- Mangrove Tannin (Rhizophora apiculata) Complexes with Copper (II) Ion as an Antifoulant in Antifouling Paint for Fish Net -- Development of Natural Bio-Plantation Waste as Pulp for Paper Making -- Sugarcane Bagasse as the Potential Agro-Waste Resource for the Immobilization of Lactobacillus rhamnosus NRRL 442 -- Equilibrium and Kinetic Studies of Benzene and Toluene Adsorption onto Microwave Irradiated-Coconut Shell Activated Carbon -- Kinetics of CO2 Adsorption on Microwave Palm Shell Activated Carbon -- The Structural Application of Bio-Composites: A Comparison of Mechanical Properties between Bio-Composites and Glass Reinforced Composites -- Chapter 4: Machinery in Area of Manufacturing and Processing of Materials, Construction Technologies and Materials -- Automatic Alarm of Tobacco Blending Accuracy Based on PLC Control System -- Embodied Carbon Potential of Conventional Construction Materials Used in Typical Malaysian Single Storey Low Cost House Using Building Information Modeling (BIM) -- Comparative Study on Seismic Response of Reinforced Concrete Frames with SMA in Column and Beam Plastic Hinge Zones -- Assessment of Connection Arrangement of Built-Up Cold-Formed Steel Section under Axial Compression -- The Correlation between Variations of Pressure against Temperature Distribution in Supersonic Subsea Compact Wet-Gas Separators -- Experimental Study of a Piezoelectric Rain Energy Harvester -- Development of Grounding Device to Reduce Current Variation in Submerged Arc Welding Process for Pressure Vessel Fabrication -- Workability of Self-Compacting Concrete Using Blended Waste Materials -- Structural Response of Offshore Blast Walls under Accidental Explosion -- Keywords Index. Authors Index.
Selected, peer reviewed papers from the 2014 3rd International Conference on Engineering and Innovative Materials (ICEIM 2014), September 4-5, 2014, Kuala Lumpur, Malaysia.
9783038266693
Materials science-Congresses.
Engineering-Congresses.
Electronic books.
TA401.3 .E545 2014
620.11
Engineering and Innovative Materials III. - 1st ed. - 1 online resource (290 pages) - Advanced Materials Research Series ; v.Volume 1043 . - Advanced Materials Research Series .
Intro -- Engineering and Innovative Materials III -- Preface and Committees -- Table of Contents -- Chapter 1: Structure and Properties of Materials -- Nano-Yttrium Aluminium Garnet Interfacial Tension and Viscosity for Enhanced Oil Recovery -- A Study of LiMn(2-X)FexO4 Cathodic Nano Material for Lithium-Ion Batteries -- Effect of Cell Material on the Performance of PV System -- The Influence of Carbon Addition on Microstructure and Mechanical Properties of Fe-22.0Al-5.0Ti Alloy -- Zinc Oxide Nanostructures Formed by Wet Oxidation of Zn Foil -- Effect of CNT Arrays on Electrical and Thermal Conductivity of Epoxy Resins -- Investigation on Microstructure and Mechanical Properties of Squeeze Cast Al-Si Alloys by Numerical Simulation -- FTIR and Electrical Studies of Hexanoyl Chitosan-Based Nanocomposite Polymer Electrolytes -- In2O3-Based Thin Films Deposited by Spray Pyrolysis as Promising Thermoelectric Material -- Solid Particle Erosion Behaviour of Martensitic and Nitrogen Alloyed Austenitic Stainless Steel -- Porous GaN for Gas Sensing Application -- Diode Parameters of Heterojunctions Comprising p-Type Si Substrate and n-Type β-FeSi2 Thin Films -- Chapter 2: Research and Development of Technologies of Synthesis and Processing of Materials -- Optimization of Multi-Pass Pocket Milling Parameter Using Ant Colony Optimization -- Investigation of Carbon Nanofiber Supported Iron Catalyst Preparation by Deposition Precipitation -- Hydrophobic-Synthesis of Bio-Based Epoxy Substrate Using Methyl Ester and its Dust Deposition and Decontamination Effects -- Synthesis and Characterization of Octaethoxycalix[4]Arene for Heavy Metal Cations Adsorbent -- Recycling of Pre-Fabricated Carbon-Fiber Waste as Filler for Sandwich Glass-Fiber Auto Parts -- Prediction of Friction Stir Processed AZ31 Magnesium Alloy Micro-Hardness Using Artificial Neural Networks. Fabrication of ZnO Nanorod for Room Temperature NO Gas Sensor -- Synthesis of Co/CNTs via Strong Electrostatic Adsorption: Effect of Metal Loading -- Water Dispersion Conductive Polypyrrole Based on Nanocrystalline Cellulose -- Electroless Deposition of Silver Nanoparticles and Nanowires in Ethylene Glycol -- Electroless Deposition of Copper Nanostructures in Aqueous Solution -- Finite Element Study of Deformation Behaviour of Al-6063 Alloy Developed by Equal Channel Angular Extrusion -- Electrochemical Characteristics of an Optimized Ni-P-Zn Electroless Composite Coating -- Synthesis of C-2-Ethoxycarbonylmethoxyphenyl Calix[4]Resorcinarene Using Salicylaldehyde as Basic Material and its Application as Adsorbent of Pb(II) Metal Cation -- Simulating of Backward Extrusion Process of Nanostructured Al-6082 Material -- Glass Ceramization as an Alternative Production Route of Forsterite Glass-Ceramics for Possible Multipurpose Uses -- Relative Effect of Sand Blasting and Acid Etching on the Surface Roughness of Pure Titanium and Titanium Alloy for Dental Implants -- The Breakdown of Carbide Network in a H23 Tool Steel by Hot Axisymmetric Compression -- Cementite Precipitation of a H21 Tool Steel after Hot Compression and Double Temper -- Solidification Behaviour of a H21 Tool Steel -- Experimental Investigation of Effect of Rotary Abrasive Jet Nozzle on Coating Removal Rate and Surface Finish -- Chapter 3: Environmental Chemistry and Practice of Using the Nature Materials -- Methane Adsorption on Chemically Modified Microwave Irradiated Palm Shell Porous Carbon -- Biopulping by Ceriporiopsis subvermispora towards Pineapple Leaf Fiber (PALF) Paper Properties -- Hydrophobicity Characterization of Bio-Wax Derived from Taro Leaf for Surface Coating Applications -- In Situ Deposition of Conducting Polymer onto Pineapple Leaf Fiber. Characteristics of Potassium Acetate - Activated Coconut Shell Carbon -- Synthesis of Zeolite A from Coal Fly Ash by Alkali Fusion and Hydrothermal -- Mangrove Tannin (Rhizophora apiculata) Complexes with Copper (II) Ion as an Antifoulant in Antifouling Paint for Fish Net -- Development of Natural Bio-Plantation Waste as Pulp for Paper Making -- Sugarcane Bagasse as the Potential Agro-Waste Resource for the Immobilization of Lactobacillus rhamnosus NRRL 442 -- Equilibrium and Kinetic Studies of Benzene and Toluene Adsorption onto Microwave Irradiated-Coconut Shell Activated Carbon -- Kinetics of CO2 Adsorption on Microwave Palm Shell Activated Carbon -- The Structural Application of Bio-Composites: A Comparison of Mechanical Properties between Bio-Composites and Glass Reinforced Composites -- Chapter 4: Machinery in Area of Manufacturing and Processing of Materials, Construction Technologies and Materials -- Automatic Alarm of Tobacco Blending Accuracy Based on PLC Control System -- Embodied Carbon Potential of Conventional Construction Materials Used in Typical Malaysian Single Storey Low Cost House Using Building Information Modeling (BIM) -- Comparative Study on Seismic Response of Reinforced Concrete Frames with SMA in Column and Beam Plastic Hinge Zones -- Assessment of Connection Arrangement of Built-Up Cold-Formed Steel Section under Axial Compression -- The Correlation between Variations of Pressure against Temperature Distribution in Supersonic Subsea Compact Wet-Gas Separators -- Experimental Study of a Piezoelectric Rain Energy Harvester -- Development of Grounding Device to Reduce Current Variation in Submerged Arc Welding Process for Pressure Vessel Fabrication -- Workability of Self-Compacting Concrete Using Blended Waste Materials -- Structural Response of Offshore Blast Walls under Accidental Explosion -- Keywords Index. Authors Index.
Selected, peer reviewed papers from the 2014 3rd International Conference on Engineering and Innovative Materials (ICEIM 2014), September 4-5, 2014, Kuala Lumpur, Malaysia.
9783038266693
Materials science-Congresses.
Engineering-Congresses.
Electronic books.
TA401.3 .E545 2014
620.11