Advanced Materials and Technologies.
Liu, Xianghua.
Advanced Materials and Technologies. - 1st ed. - 1 online resource (1652 pages) - Advanced Materials Research Series ; v.Volumes 1004-1005 . - Advanced Materials Research Series .
Intro -- Advanced Materials and Technologies -- Preface and Conference Organization -- Table of Contents -- Chapter 1: Nano Materials Science and Technology -- Grain Boundary Internal Friction Peak in Nanocrystalline Aluminum Studied by Continuously Changing-Temperature -- Synthesis of Dendritic Silver Nanostructures on Al Foil by Galvanic Displacement for Catalytic Degradation of Methylene Blue -- Synthesis of Porous CeO2 Nanostructures Using Cotton Fibers as Biomaterial Template -- Effect of Feeding Rate on Properties of Cu-Ag Alloy Nanopowders -- Morphological Characteristics of W-Nanowires after Selective Etching -- Nanoscience: The Scale of Latvia -- Preparation of Conductive Ink with Silver Nanoparticles and Application in Transparent Conductive Films -- Shape-Controlled Synthesis of Ag Nanocubes with Uniform Size -- Recent Simulation Study on Precise Positioning of Carbon Nanotubes by Dielectrophoresis -- Synthesis of Hollow Ba0.7Sr0.3TiO3 Nanocubes by Using Molten Hydrated Salt as a Solvent -- Preparation and Modification of Nanometer TiO2 with High Reflectivity -- Self-Assembly of Gold Nanoparticle Arrays with Anodic Aluminum Oxide Template -- Research on the Controllable Preparation of Silver Nanowires in Conductive Adhesives -- Preparation of Size Controllable BaTiO3 Nanoparticles in Microemulsion at Low Temperature -- Synthesis of Titanium Carbonitride Powders by Reactive Ball Milling of Titanium, Graphite and Urea -- Synthesis and Characterization of Eu3+-Doped Transparent Glass-Ceramics Containing Nanocrystalline AlNbO4 -- Retardant Properties of Nanosilica/PTFE Nanoparticals-Reinforced Polypropylene -- Performance Study of Ti-Pillared Montmorillonite Nanocomposites -- A Study on a Functional Emulsion Coating and Infrared Laser-Induced Imaging Performance. Effect of Chemical Treatment on Multi-Walled Carbon Nanotubes/Epoxy Composite -- Preparation of Nano-Composite Photocatalyst to Remove TOC in Power Plant Boiler Make-Up Water -- Synthesis and Magnetic Properties of LaMnO3/α-Al2O3 Magnetic Nanocomposites -- Chapter 2: Metals and Alloys -- Corrosion Behaviour of AZ91DSm1.0 with Different Preparation Methods -- Effect of the Content of Ca on the Microstructure of Magnesium Alloys -- Effects of Pulsed Magnetic Field on the Microstructure and Mechanical Properties of Mg97Y2Zn1 Alloy -- Impact Strength Behavior and Fracture Morphologies of Tungsten Alloy with High Deformation -- Microstructure and Property Analysis of Furnace Pipe Used over a Design Cycle -- The Research Progress of Aluminum Alloy Corrosion in Marine Atmosphere -- Effect of Environment on Fatigue Crack Propagation Behavior of an Al-Cu-Mg Aluminum Alloy -- Microstructure Evolution and Mechanical Properties of an Al-Cu-Mg Alloy at Elevated Temperature -- Microstructure Evolution of Zn-Al Cladding Fabricated on AZ31 Magnesium Alloy -- Effects of Specimen Diameter on Microstructure and Microhardness of Hot Extruded AZ31B Magnesium Alloy -- Influence of Pre-Deformation Temperature on Mechanics Performance of NiTiNb Shape Memory Alloy: First-Principles Calculation -- Microstructure Characteristic of AZ31/7005 Joints by GTAW with Filler Wire of Mg-Al Alloy -- Effect of RE on Microstructure and Properties of AM60 Magnesium Alloy -- Chapter 3: Steel Materials and Applications -- The Effect of Cooling Rate and Overaging Time on the Mechanical Properties of a Ultra-Low Carbon Auto Steel -- High Silicon Addition in 780 MPa Cold-Rolled Dual Phase Steel for Carbon Reduction and Plastic Reinforce -- Research of Microstructure and Mechanical Properties of the Cold Rolled Hot-Dip Galvanizing DP450 Steel with Low Carbon and High Chromium. Study of Corrosion Mechanism of Al2O3-MgO Refractories and its Effect on Cleanness of Molten Steel -- Effect of Retained Austenite Stability on Mechanical Properties of Bainitic Rail Steel -- Enhanced Mechanical Properties of a 0.22C-Mn-Si-Cr Low Alloyed Steel Treated by ART and Q& -- P Processes -- Experimental Researches on Nonlinear Strain Paths Forming for Dual Phase Steel -- Investigation on the Austenitic Reverse Transformation of 0.2C-3Mn-1.7Si Steel with an Ultra-Slow Heating Rate -- Analysis of Orange Peel Defects on Hot-Dip Galvanized High Strength Low Alloy Steel -- Deep Denitrogenization Technology of 23Co-Ni Steel in Vacuum Induction Melting Furnace -- Effect of Mn Addition on Mechanical Property and Corrosion Behavior in Hot Rolled 19 % Cr Duplex Stainless Steel -- Simulation of Martensitic Transformation of High Strength and Elongation Steel by Cellular Automaton -- Investigation of an Isatin Schiff Base as Corrosion Inhibitor in NaCl Solution -- Chapter 4: Resin, Rubber and Polymer Materials -- Effect of Types of Antioxidants on Thermal and Thermo-Oxidative Degradation of Epoxidized Natural Rubber -- Thermal Safety Study of One New-Type DB Propellant -- Application of a Novel DOPO-Based Polymeric Phosphate Flame Retardant for Polycarbonate/Acrylonitrile-butadiene-styrene Alloy -- Energy Method in the Calculation Stability of Compressed Polymer Rods Considering Creep -- Study on Low Temperature Stripping Material Based on the Modified Acrylate Polymer -- Effect of Polyolefin on Color Difference of Ethylene Propylene Diene Rubber/Aluminium Oxide Composites -- The Preparation of Higher Ordered Poly(3-hexylthiophene) by Oxidative Method -- Study on Synthesis of Polyether-Modified Polysiloxane -- Preparation and Study of P(Styrene-Divinylbenzene)/Polyacrylamide Particles. Thermal and Oxidative Stability Thermosets Derived from Hybrids of Cyclosilazanes and Silicon-Containing Polyarylacetylene -- The VO Defect in Electron Irradiated Czochralski Silicon -- Study on the Cell Structure and Mechanical Properties of Methyl Vinyl Silicone Rubber Foam Materials -- Facile Process for Preparation of PS/PtOEP Composite Microspheres and their Oxygen Sensing Properties -- Study on Synthesis of Starch Based Polymer Microspheres and Adsorption Behavior for Lead Ions -- A High-Efficiency Inflame Retardant Modification of Poly(Ethylene Terephthalate)(PET) Fabric -- Chapter 5: Optical/Electrical/Magnetic Materials and Technology -- KDP Crystals Grown in Defined Crystallographic Direction -- Experimental Study of the Strain in Different Structures of the InGaN/GaN and InGaN/AlInGaN Quantum Well -- Preparation and Optical Properties of Er3+-Yb3+ Co-Doped ZnO-B2O3- SiO2 -TiO2Transparent Glass-Ceramics -- Small Angle Neutron Scattering Study of Ferritic ODS Alloys -- Synthesis and Luminescent Properties of Blue-Emitting Hydrotalcite-Like Compound for NUV Light-Emitting Diodes -- Synthesis and Luminescent Properties of Monodisperse Spherical SiO2/Ca10(PO4)6(OH)2: Eu3+ Particles with Core-Shell Structure -- The Synthesis of the Novel Vacuum Ultraviolet Double Frequency Crystal KBe2BO3F2 (KBBF) -- Yellow Luminescence Iridium Complex and its Composite with Polymers -- Doping Strategies of Bi (Ti0.5Ni0.5)O3 for Increased Performance in BiFeO3 -- Photoelectric Properties of High Power GaN Based LEDs on Cu/Cr Composite Substrates -- Preparation of Sm2Fe17 Columnar Grains Ribbons by Rapid Quenching -- The Effect of Li2O Content on the Electrochemical Performance of β (β′′)-Al2O3 -- Synthesis, Structure and Photocatalytic Property of [Ni(en)2][(NH2)2(C2H4)2NH]2·2H2O. Resistivity Characterization of Ti Based ATO and its Preparation -- The Effect of Different Meshes on the AC Loss Calculation of HTS Conductors -- Synthesis and Photoluminescence Properties of Monodisperse Spherical SiO2@Lu2O3: Eu3+ Particles with Core-Shell Structure -- Improved Model of Middle Layer Used for Design of Piezoelectric Bimorph Actuator -- Chapter 6: Ceramic Materials and Technologies -- Effect of B4C-Si3N4 on Crystallization and Sintering of Fused Quartz Ceramic Material -- Estimation of Water Desorption in Drying of Membrane Structure System -- High Yield Polyborosilazane Precursor for SiBN Ceramics -- Raman Spectra of SrTiO3 Prepared by Direct Current Arc Discharge Plasma Process -- Simulation of the Electrical Properties of Semiconductive BaTiO3 Ceramic Varistors Using Continuum Theory -- The Influence of Li on the Point Defect Structure of ZnO Varistor Ceramics -- Influences of Different Calcining Method on the Characteristics of 0.65(K0.5Bi0.5TiO3)-0.35BaTiO3 Ceramics -- Error Analysis of Ceramic Materials Fracture Toughness Measured by the Single Edge Notched Beam Method -- Non-Isothermal Method for Charactering the Oxidation Resistance Property of SiAlON Materials -- Chapter 7: Composite Research and Applications -- Application of Lightweight Composite Materials in Heavy Roadway -- Finite Element Analysis of the Tensile Properties of Composite Laminates with Open Holes -- Numerical Simulation on Ballistic Performance of Wf/Metallic Glass Composite with Tungsten Fiber Spacing -- Principal Component Analysis of Structure Model Indexes on Composite Friction Materials -- Sound Absorption Property of Hydrogenated Carboxyl Nitrile Rubber/Seven Hole Polyester Fiber Composites -- Statistical Classification Method of Structure Model on Compound Friction Materials. Stress Singularities near Interface Crack Tip for Mode II of Orthotropic Bi-Material.
Selected, peer reviewed papers from the 4th International Conference on Advanced Engineering Materials and Technology (AEMT 2014), June 14-15, 2014, Xiamen, China.
9783038265894
Materials-Congresses.
Electronic books.
TA401.3 .I584 2014
620.112
Advanced Materials and Technologies. - 1st ed. - 1 online resource (1652 pages) - Advanced Materials Research Series ; v.Volumes 1004-1005 . - Advanced Materials Research Series .
Intro -- Advanced Materials and Technologies -- Preface and Conference Organization -- Table of Contents -- Chapter 1: Nano Materials Science and Technology -- Grain Boundary Internal Friction Peak in Nanocrystalline Aluminum Studied by Continuously Changing-Temperature -- Synthesis of Dendritic Silver Nanostructures on Al Foil by Galvanic Displacement for Catalytic Degradation of Methylene Blue -- Synthesis of Porous CeO2 Nanostructures Using Cotton Fibers as Biomaterial Template -- Effect of Feeding Rate on Properties of Cu-Ag Alloy Nanopowders -- Morphological Characteristics of W-Nanowires after Selective Etching -- Nanoscience: The Scale of Latvia -- Preparation of Conductive Ink with Silver Nanoparticles and Application in Transparent Conductive Films -- Shape-Controlled Synthesis of Ag Nanocubes with Uniform Size -- Recent Simulation Study on Precise Positioning of Carbon Nanotubes by Dielectrophoresis -- Synthesis of Hollow Ba0.7Sr0.3TiO3 Nanocubes by Using Molten Hydrated Salt as a Solvent -- Preparation and Modification of Nanometer TiO2 with High Reflectivity -- Self-Assembly of Gold Nanoparticle Arrays with Anodic Aluminum Oxide Template -- Research on the Controllable Preparation of Silver Nanowires in Conductive Adhesives -- Preparation of Size Controllable BaTiO3 Nanoparticles in Microemulsion at Low Temperature -- Synthesis of Titanium Carbonitride Powders by Reactive Ball Milling of Titanium, Graphite and Urea -- Synthesis and Characterization of Eu3+-Doped Transparent Glass-Ceramics Containing Nanocrystalline AlNbO4 -- Retardant Properties of Nanosilica/PTFE Nanoparticals-Reinforced Polypropylene -- Performance Study of Ti-Pillared Montmorillonite Nanocomposites -- A Study on a Functional Emulsion Coating and Infrared Laser-Induced Imaging Performance. Effect of Chemical Treatment on Multi-Walled Carbon Nanotubes/Epoxy Composite -- Preparation of Nano-Composite Photocatalyst to Remove TOC in Power Plant Boiler Make-Up Water -- Synthesis and Magnetic Properties of LaMnO3/α-Al2O3 Magnetic Nanocomposites -- Chapter 2: Metals and Alloys -- Corrosion Behaviour of AZ91DSm1.0 with Different Preparation Methods -- Effect of the Content of Ca on the Microstructure of Magnesium Alloys -- Effects of Pulsed Magnetic Field on the Microstructure and Mechanical Properties of Mg97Y2Zn1 Alloy -- Impact Strength Behavior and Fracture Morphologies of Tungsten Alloy with High Deformation -- Microstructure and Property Analysis of Furnace Pipe Used over a Design Cycle -- The Research Progress of Aluminum Alloy Corrosion in Marine Atmosphere -- Effect of Environment on Fatigue Crack Propagation Behavior of an Al-Cu-Mg Aluminum Alloy -- Microstructure Evolution and Mechanical Properties of an Al-Cu-Mg Alloy at Elevated Temperature -- Microstructure Evolution of Zn-Al Cladding Fabricated on AZ31 Magnesium Alloy -- Effects of Specimen Diameter on Microstructure and Microhardness of Hot Extruded AZ31B Magnesium Alloy -- Influence of Pre-Deformation Temperature on Mechanics Performance of NiTiNb Shape Memory Alloy: First-Principles Calculation -- Microstructure Characteristic of AZ31/7005 Joints by GTAW with Filler Wire of Mg-Al Alloy -- Effect of RE on Microstructure and Properties of AM60 Magnesium Alloy -- Chapter 3: Steel Materials and Applications -- The Effect of Cooling Rate and Overaging Time on the Mechanical Properties of a Ultra-Low Carbon Auto Steel -- High Silicon Addition in 780 MPa Cold-Rolled Dual Phase Steel for Carbon Reduction and Plastic Reinforce -- Research of Microstructure and Mechanical Properties of the Cold Rolled Hot-Dip Galvanizing DP450 Steel with Low Carbon and High Chromium. Study of Corrosion Mechanism of Al2O3-MgO Refractories and its Effect on Cleanness of Molten Steel -- Effect of Retained Austenite Stability on Mechanical Properties of Bainitic Rail Steel -- Enhanced Mechanical Properties of a 0.22C-Mn-Si-Cr Low Alloyed Steel Treated by ART and Q& -- P Processes -- Experimental Researches on Nonlinear Strain Paths Forming for Dual Phase Steel -- Investigation on the Austenitic Reverse Transformation of 0.2C-3Mn-1.7Si Steel with an Ultra-Slow Heating Rate -- Analysis of Orange Peel Defects on Hot-Dip Galvanized High Strength Low Alloy Steel -- Deep Denitrogenization Technology of 23Co-Ni Steel in Vacuum Induction Melting Furnace -- Effect of Mn Addition on Mechanical Property and Corrosion Behavior in Hot Rolled 19 % Cr Duplex Stainless Steel -- Simulation of Martensitic Transformation of High Strength and Elongation Steel by Cellular Automaton -- Investigation of an Isatin Schiff Base as Corrosion Inhibitor in NaCl Solution -- Chapter 4: Resin, Rubber and Polymer Materials -- Effect of Types of Antioxidants on Thermal and Thermo-Oxidative Degradation of Epoxidized Natural Rubber -- Thermal Safety Study of One New-Type DB Propellant -- Application of a Novel DOPO-Based Polymeric Phosphate Flame Retardant for Polycarbonate/Acrylonitrile-butadiene-styrene Alloy -- Energy Method in the Calculation Stability of Compressed Polymer Rods Considering Creep -- Study on Low Temperature Stripping Material Based on the Modified Acrylate Polymer -- Effect of Polyolefin on Color Difference of Ethylene Propylene Diene Rubber/Aluminium Oxide Composites -- The Preparation of Higher Ordered Poly(3-hexylthiophene) by Oxidative Method -- Study on Synthesis of Polyether-Modified Polysiloxane -- Preparation and Study of P(Styrene-Divinylbenzene)/Polyacrylamide Particles. Thermal and Oxidative Stability Thermosets Derived from Hybrids of Cyclosilazanes and Silicon-Containing Polyarylacetylene -- The VO Defect in Electron Irradiated Czochralski Silicon -- Study on the Cell Structure and Mechanical Properties of Methyl Vinyl Silicone Rubber Foam Materials -- Facile Process for Preparation of PS/PtOEP Composite Microspheres and their Oxygen Sensing Properties -- Study on Synthesis of Starch Based Polymer Microspheres and Adsorption Behavior for Lead Ions -- A High-Efficiency Inflame Retardant Modification of Poly(Ethylene Terephthalate)(PET) Fabric -- Chapter 5: Optical/Electrical/Magnetic Materials and Technology -- KDP Crystals Grown in Defined Crystallographic Direction -- Experimental Study of the Strain in Different Structures of the InGaN/GaN and InGaN/AlInGaN Quantum Well -- Preparation and Optical Properties of Er3+-Yb3+ Co-Doped ZnO-B2O3- SiO2 -TiO2Transparent Glass-Ceramics -- Small Angle Neutron Scattering Study of Ferritic ODS Alloys -- Synthesis and Luminescent Properties of Blue-Emitting Hydrotalcite-Like Compound for NUV Light-Emitting Diodes -- Synthesis and Luminescent Properties of Monodisperse Spherical SiO2/Ca10(PO4)6(OH)2: Eu3+ Particles with Core-Shell Structure -- The Synthesis of the Novel Vacuum Ultraviolet Double Frequency Crystal KBe2BO3F2 (KBBF) -- Yellow Luminescence Iridium Complex and its Composite with Polymers -- Doping Strategies of Bi (Ti0.5Ni0.5)O3 for Increased Performance in BiFeO3 -- Photoelectric Properties of High Power GaN Based LEDs on Cu/Cr Composite Substrates -- Preparation of Sm2Fe17 Columnar Grains Ribbons by Rapid Quenching -- The Effect of Li2O Content on the Electrochemical Performance of β (β′′)-Al2O3 -- Synthesis, Structure and Photocatalytic Property of [Ni(en)2][(NH2)2(C2H4)2NH]2·2H2O. Resistivity Characterization of Ti Based ATO and its Preparation -- The Effect of Different Meshes on the AC Loss Calculation of HTS Conductors -- Synthesis and Photoluminescence Properties of Monodisperse Spherical SiO2@Lu2O3: Eu3+ Particles with Core-Shell Structure -- Improved Model of Middle Layer Used for Design of Piezoelectric Bimorph Actuator -- Chapter 6: Ceramic Materials and Technologies -- Effect of B4C-Si3N4 on Crystallization and Sintering of Fused Quartz Ceramic Material -- Estimation of Water Desorption in Drying of Membrane Structure System -- High Yield Polyborosilazane Precursor for SiBN Ceramics -- Raman Spectra of SrTiO3 Prepared by Direct Current Arc Discharge Plasma Process -- Simulation of the Electrical Properties of Semiconductive BaTiO3 Ceramic Varistors Using Continuum Theory -- The Influence of Li on the Point Defect Structure of ZnO Varistor Ceramics -- Influences of Different Calcining Method on the Characteristics of 0.65(K0.5Bi0.5TiO3)-0.35BaTiO3 Ceramics -- Error Analysis of Ceramic Materials Fracture Toughness Measured by the Single Edge Notched Beam Method -- Non-Isothermal Method for Charactering the Oxidation Resistance Property of SiAlON Materials -- Chapter 7: Composite Research and Applications -- Application of Lightweight Composite Materials in Heavy Roadway -- Finite Element Analysis of the Tensile Properties of Composite Laminates with Open Holes -- Numerical Simulation on Ballistic Performance of Wf/Metallic Glass Composite with Tungsten Fiber Spacing -- Principal Component Analysis of Structure Model Indexes on Composite Friction Materials -- Sound Absorption Property of Hydrogenated Carboxyl Nitrile Rubber/Seven Hole Polyester Fiber Composites -- Statistical Classification Method of Structure Model on Compound Friction Materials. Stress Singularities near Interface Crack Tip for Mode II of Orthotropic Bi-Material.
Selected, peer reviewed papers from the 4th International Conference on Advanced Engineering Materials and Technology (AEMT 2014), June 14-15, 2014, Xiamen, China.
9783038265894
Materials-Congresses.
Electronic books.
TA401.3 .I584 2014
620.112