Fatigue and Fracture Mechanics XXV.

Intro -- Fatigue and Fracture Mechanics XXV -- Preface and Scientific Committee -- Table of Contents -- Chapter 1: Fatigue of Materials -- The Influence of the Ferrite and Pearlite Grain Size on the S-N Fatigue Characteristics of Steel -- Experimental Investigation of Fatigue Damage Accumulation in En295 Steel -- Multiaxial Fatigue Life Assessment Method Based on the Mean Value of Modified Second Invariant of the Deviatoric Stress -- Fatigue Characteristic of S355J2 Steel after Surface Frictional-Mechanical Treatment in Corrosive Environment -- Analysis of Strain Distribution in Notch Zone in Aluminium FSW Joints for Irregular Fatigue Loading Conditions -- Comparison of C45 Steel Fatigue Characteristics Carried out at Controlled Stress and Energy Parameter, Subjected to Fully Reversed Bending -- Accumulation of Fatigue Damages for Block-Type Loads with Use of Material Memory Function -- Influence of Stresses below the Fatigue Limit on Fatigue Life -- Cumulative Energy of Fatigue Cracking under Variable Amplitude Loading on the Example of C45 Steel -- Fatigue Life of CrMoV Steel after Long Term Service -- Accuracy of Analytical-Experimental Method for Determining the Fatigue Characteristics in a Limited Life Region -- Formulation of a Direct Spectral Method for Counting of Cycles for Bi-Modal Stress History -- Analysis of Size Effect in High-Cycle Fatigue for EN AW-6063 -- Applicability of Empirical Formulae for the Fatigue Notch Factor to Estimate Riveted Lap Joint Fatigue Strength -- Thermo-Mechanical Fatigue of Thick-Walled Components of Power Devices -- Research on the Dependence between the Fatigue Life of X20CrMoV12.1 and P91 Steels under the Conditions of the Interactions of Thermo-Mechanical and Isothermal Low-Cycle Fatigue -- Structure and Mechanical Properties of 1.4539 Austenic Steel Joints Made by TIG and Laser-Beam Welding.

Cast Steel Tests under Thermal Fatigue Conditions -- Determination of Fatigue Life with the Use of Spectral Method on the Basis of Fatigue Strain Characteristics -- Influence of Estimation Methods of Power Spectral Density Function on the Calculated Fatigue Life with Spectral Method -- Analysis of the Fatigue Life of Sintered Porous 316L Steel with Different Density -- Chapter 2: Fracture Behaviour of Materials -- Crack Growth Path in Specimens with Rectangular Section under Bending with Torsion -- The Influence of In-Plane Constraint on Void Behavior in Front of a Crack in Plane Strain -- Method for Monitoring the Destruction Process of Materials Using a High-Speed Camera and a Catodioptric Stereo-Vision System -- The Influence of Strain Conditions in Steel Samples on the Fatigue Crack Growth and Delay after Overload -- The Influence of the Out-of-Plane Constraint on Fracture Toughness of High Strength Steel at Low Temperatures -- Fracture Toughness of Hardox-400 Steel at the Ductile-to-Brittle Transition Temperature Range − The Influence of the In-Plane Constraint -- Chapter 3: Other Aspects of Material Strength -- The Usage of the Method of Fundamental Solution for Twisting Composite Rod as a Basis of the Local Analysis -- The Effect of the Detonation Velocity in Explosively Welded Steel-Zirconium Bimetal on the Residual Stresses Determined by the Hole-Drilling Method -- The Influence of Modelling Material Zones on Strains and Stresses at Weld Toe Notch -- Experimental Study of Non-Uniform Distribution of Basic Mechanical Parameters in Steel-Titanium Bimetal -- Shear Strength Testing of Bonded Joints of Dental Materials -- The Influence of Mesh Morphology on the Accuracy of FEM Analysis of Bar with a Ringed Notch under Tension -- Performance of Bone Modelling Techniques in the Assessment of Bone Fragility.

Investigation of Material Properties of Layered Al-Ti Material with the Use of Microspecimens -- Experimental Validation of the Numerical Model of a Testing Platform Impact on a Road Mast -- The Development of an Experimental Research Plan Based on Local Strain-Life Method for an Air Handling Unit Subjected to Seismic Loads -- Influence of Adhesive Layer on Mechanical Properties of Multilayer Pipes -- Temperature Changes Induced by the Portevin-Le Châtelier (PLC) Effect during Tensile Test Based on the Example of CuZn37 Brass -- Modelling of Charpy Test Using the FEM Method in LS-DYNA Software -- Application of Vibration for Energy and Data Transfer in Mechanical Constructions -- Energy Harvesting -- Analysis of the Local Phenomena during Riveting Process -- Evaluation of the Riveted Joint Load-Carrying Capacity Based on the Formed Rived Head Dimension -- Determination of Dynamic Characteristics of Welded Joints Made of Steel S460NL -- Numerical and Experimental Examination of Ballistic System Subjected to IED Explosion -- Keywords Index -- Authors Index.

Selected, peer reviewed papers from the 25th Polish National Conference on ,,Fatigue and Fracture Mechanics", May 20-23, 2014, Fojutowo, Poland.

Description based on publisher supplied metadata and other sources.

Electronic reproduction. Ann Arbor, Michigan : ProQuest Ebook Central, 2024. Available via World Wide Web. Access may be limited to ProQuest Ebook Central affiliated libraries.